|
Product SKUs |
SYS-6015T-INFV | SuperServer 6015T-INFV (Silver) |
SYS-6015T-INFB | SuperServer 6015T-INFB (Black) |
|
Motherboards |
2x X7DBT-INF |
|
Processor/Cache |
CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Quad-Core Intel XeonProcessor 5400/5300 sequence
- (Harpertown/Clovertown processor) up to 3.16 GHz
- Dual-Core Intel Xeon processor 5200/5100/5000 sequence (Wolfdale)
- (Woodcrest/Dempsey processor) up to 3.40 GHz
|
System Bus | 1333 / 1066 / 667 MHz system bus |
Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
|
System Memory (per Node) |
Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533 MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
Memory Type | 667 / 533 MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 512 MB, 1GB, 2GB, 4GB |
Memory Voltage | |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
|
On-Board Devices |
Chipset | - Intel 5000P (Blackford) chipset
- MCH + ESB2
|
Infiniband | Mellanox MT25204AD-FCC-D Single-Port |
SATA | - Intel ESB2 SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0, v.1.5
- 200-pin IPMI slot (SIMSO)
- (Optional: AOC-SIMSO(+))
|
Network Controller | - Intel (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT support for fast, scaleable, and reliable networking
|
Graphics | ATI ES1000 controller with 16 MB of video memory |
Super I/O | Winbond 83627HF chip |
Clock Generator | CK410B |
|
Input / Output (per Node) |
Serial ATA | Four SATA ports |
LAN | 2x RJ45 LAN ports |
USB | - 2x USB rear ports
- 2x USB internal headers
- Total 4x USB 2.0 Compliant
|
VGA | 1x VGA Port |
Serial Port | 1x Fast UART 16550 serial port |
|
Chassis |
Form Factor | 1U Rackmount |
Model | SC808T-980V(B) |
|
Dimensions |
Height | 1.7" (43 mm) |
Width | 17.2" (437mm) |
Depth | 27.75" (705 mm) |
Gross Weight | 40 lbs (18.1 kg) |
Available Colors | Silver, Black |
|
Front Panel (per Node) |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
|
Expansion Slots (per Node) |
PCI-Express | 1x (x8) PCI-e slot |
|
Drive Bays (per Node) |
Hot-Swap | 2x 3.5" SATA Hot-swap drive bays |
|
SATA Backplane |
1U SATA Backplane |
|
System Cooling |
Fans | 6x Cooling Fans |
|
Power Supply |
980 W AC-DC power supply w/ PFC |
AC Input | 100 - 240 V, 60-50 Hz, 14-6 A |
+5 V sb | 4 A |
+12 V | 81 A |
|
System BIOS |
BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
|
|
Operating Environment / Compliance |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|