| |
Product SKUs |
| SYS-6015T-INFV | SuperServer 6015T-INFV (Silver) |
| SYS-6015T-INFB | SuperServer 6015T-INFB (Black) |
| |
Motherboards |
| 2x X7DBT-INF |
| |
Processor/Cache |
| CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Quad-Core Intel XeonProcessor 5400/5300 sequence
- (Harpertown/Clovertown processor) up to 3.16 GHz
- Dual-Core Intel Xeon processor 5200/5100/5000 sequence (Wolfdale)
- (Woodcrest/Dempsey processor) up to 3.40 GHz
|
| System Bus | 1333 / 1066 / 667 MHz system bus |
| Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
| |
System Memory (per Node) |
| Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533 MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
| Memory Type | 667 / 533 MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 512 MB, 1GB, 2GB, 4GB |
| Memory Voltage | |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel 5000P (Blackford) chipset
- MCH + ESB2
|
| Infiniband | Mellanox MT25204AD-FCC-D Single-Port |
| SATA | - Intel ESB2 SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0, v.1.5
- 200-pin IPMI slot (SIMSO)
- (Optional: AOC-SIMSO(+))
|
| Network Controller | - Intel (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT support for fast, scaleable, and reliable networking
|
| Graphics | ATI ES1000 controller with 16 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Clock Generator | CK410B |
| |
Input / Output (per Node) |
| Serial ATA | Four SATA ports |
| LAN | 2x RJ45 LAN ports |
| USB | - 2x USB rear ports
- 2x USB internal headers
- Total 4x USB 2.0 Compliant
|
| VGA | 1x VGA Port |
| Serial Port | 1x Fast UART 16550 serial port |
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | SC808T-980V(B) |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 27.75" (705 mm) |
| Gross Weight | 40 lbs (18.1 kg) |
| Available Colors | Silver, Black |
| |
Front Panel (per Node) |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
Expansion Slots (per Node) |
| PCI-Express | 1x (x8) PCI-e slot |
| |
Drive Bays (per Node) |
| Hot-Swap | 2x 3.5" SATA Hot-swap drive bays |
| |
SATA Backplane |
| 1U SATA Backplane |
| |
System Cooling |
| Fans | 6x Cooling Fans |
| |
Power Supply |
| 980 W AC-DC power supply w/ PFC |
| AC Input | 100 - 240 V, 60-50 Hz, 14-6 A |
| +5 V sb | 4 A |
| +12 V | 81 A |
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
|
| |
Operating Environment / Compliance |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
