| |
Product SKUs |
| SYS-1027R-WC1RT | SuperServer 1027R-WC1RT (Black) |
| |
Motherboard |
| Super X9DRW-CTF31 |
| |
Processor/Cache |
| CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600 and E5-2600 v2 family?
- (up to 130 W TDP)
|
| Note | ? BIOS version 3.0 or above is required |
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory |
| Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Up to 1 TB DDR3 ECC LRDIMM
- Up to 512 GB DDR3 ECC registered memory (RDIMM)
- Up to 128 GB DDR3 ECC and non-ECC UDIMM
|
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602J chipset |
| SATA | SATA-3 (6 Gb/s) with RAID 0, 1 |
| SAS | - SAS-3 (12 Gb/s) via LSI 3108
- RAID 0, 1, 5, 6, 10, 50, 60 support
- 2 GB DDR3 Cache
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers | - Intel x540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
| Graphics | G200 (Nuvoton WPCM450 BMC) |
| |
Input / Output |
| Serial ATA | 2x SATA-3 (6 Gb/s) ports |
| SAS | 8x SAS-3 (12 Gb/s) ports |
| LAN | - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 6x USB 2.0 ports total (4 rear, 2 front) |
| VGA | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 header |
| |
Management |
| Software | - SuperDoctor® III
- Watch Dog
- NMI
- SMCBU and SMM
- IPMI 2.0
- Intel Node Manager
|
| Power Configurations | - ACPI / APM Power Management
- Power-on mode for AC power recovery
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-116AC-R700WB |
| |
Dimensions |
| Width | 17.2" (437mm) |
| Height | 1.7" (43 mm) |
| Depth | 23.5" (597 mm) |
| Gross Weight | 46 lbs (20.9 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- UID button
|
| LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| |
Expansion Slots |
| PCI-Express | - 2x PCI-E 3.0 x16 full-height, Half-length slots
- UIO AoC Compatibility Matrix
- (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| |
Drive Bays |
| Hot-Swap | 10 Hot-Swap 2.5" SAS / SATA HDD trays (connected to onboard storage controller) |
| |
Backplane |
| SAS/SATA HDD Backplane |
| |
System Cooling |
| Fans | 6x 40 x56 mm Counter-rotating PWM Fans |
| |
Power Supply |
| 700 W/750 W Redundant AC-DC high-efficiency power supply with PMBus and I²C |
| AC Voltage | - 700 W: 100 - 140 V, 50-60 Hz, 8.5-6 A
- 750 W: 180 - 240 V, 60-50 Hz, 5-3.8 A
|
| +5 V | 25 A |
| DC Output +5 V standby | 3 A |
| DC Output +12 V | - 700 W: 58 A @ 100-140 V
- 750 W: 62 A @ 180-240 V
|
| With Power Distributor | - +5 V: 25 A
- +3.3 V: 12 A
- -12V: 0.6 A
|
| Certification | Gold Certified |
| -12 V | 0.5 A |
| +3.3 V | 12 A |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- BIOS resuce hot keys
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 60 °C (-40 °F to 140 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
