|
Product SKUs |
SYS-1027R-WC1RT | SuperServer 1027R-WC1RT (Black) |
|
Motherboard |
Super X9DRW-CTF31 |
|
Processor/Cache |
CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600 and E5-2600 v2 family?
- (up to 130 W TDP)
|
Note | ? BIOS version 3.0 or above is required |
Cache | Up to 30 MB |
System Bus | QPI up to 8 GT/s |
|
System Memory |
Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Up to 1 TB DDR3 ECC LRDIMM
- Up to 512 GB DDR3 ECC registered memory (RDIMM)
- Up to 128 GB DDR3 ECC and non-ECC UDIMM
|
Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
Memory Voltage | 1.5 V, 1.35 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
Chipset | Intel C602J chipset |
SATA | SATA-3 (6 Gb/s) with RAID 0, 1 |
SAS | - SAS-3 (12 Gb/s) via LSI 3108
- RAID 0, 1, 5, 6, 10, 50, 60 support
- 2 GB DDR3 Cache
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers | - Intel x540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
Graphics | G200 (Nuvoton WPCM450 BMC) |
|
Input / Output |
Serial ATA | 2x SATA-3 (6 Gb/s) ports |
SAS | 8x SAS-3 (12 Gb/s) ports |
LAN | - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | 6x USB 2.0 ports total (4 rear, 2 front) |
VGA | 1x VGA port |
Serial Port / Header | 1x Fast UART 16550 header |
|
Management |
Software | - SuperDoctor® III
- Watch Dog
- NMI
- SMCBU and SMM
- IPMI 2.0
- Intel Node Manager
|
Power Configurations | - ACPI / APM Power Management
- Power-on mode for AC power recovery
|
|
Chassis |
Form Factor | 1U Rackmount |
Model | CSE-116AC-R700WB |
|
Dimensions |
Width | 17.2" (437mm) |
Height | 1.7" (43 mm) |
Depth | 23.5" (597 mm) |
Gross Weight | 46 lbs (20.9 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- UID button
|
LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
|
Expansion Slots |
PCI-Express | - 2x PCI-E 3.0 x16 full-height, Half-length slots
- UIO AoC Compatibility Matrix
- (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
|
Drive Bays |
Hot-Swap | 10 Hot-Swap 2.5" SAS / SATA HDD trays (connected to onboard storage controller) |
|
Backplane |
SAS/SATA HDD Backplane |
|
System Cooling |
Fans | 6x 40 x56 mm Counter-rotating PWM Fans |
|
Power Supply |
700 W/750 W Redundant AC-DC high-efficiency power supply with PMBus and I²C |
AC Voltage | - 700 W: 100 - 140 V, 50-60 Hz, 8.5-6 A
- 750 W: 180 - 240 V, 60-50 Hz, 5-3.8 A
|
+5 V | 25 A |
DC Output +5 V standby | 3 A |
DC Output +12 V | - 700 W: 58 A @ 100-140 V
- 750 W: 62 A @ 180-240 V
|
With Power Distributor | - +5 V: 25 A
- +3.3 V: 12 A
- -12V: 0.6 A
|
Certification | Gold Certified |
-12 V | 0.5 A |
+3.3 V | 12 A |
|
System BIOS |
BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- BIOS resuce hot keys
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 60 °C (-40 °F to 140 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|