| |
Product SKUs |
| SYS-1019S-M2 | SuperServer 1019S-M2 (Black) |
| |
Motherboard |
| Super X11SSZ-QF |
| |
Processor/Cache |
| CPU | - Intel® 6th Gen Core i7/i5/i3 series, Intel® Celeron®, Intel® Pentium® processors; CPU TDP support up to 80W TDP
- Single Socket H4 (LGA 1151)
|
| |
System Memory |
| Memory Capacity | - 4x 288-pin DDR4 DIMM slots
- Up to 64GB DDR4 Non-ECC UDIMM
|
| Memory Type | 2133/1866/1600MHz Non-ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
| DIMM Sizes | 16GB, 8GB, 4GB |
| Memory Voltage | 1.2 V |
| |
On-Board Devices |
| Chipset | Intel® Q170 Express chipset |
| SATA | - SATA3 (6Gbps) via Intel® Q170 Express controller
- RAID 0, 1 support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel® PHY i219LM + Intel® i210AT Gigabit Ethernet LAN Controllers
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| Audio | RealTek ALC 888S High Definition Audio |
| Video | ASPEED AST2400 BMC and Intel HD Graphics 530 |
| |
Input / Output |
| SATA | 2x SATA3 (6Gbps) ports; RAID 0, 1 |
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 2x USB 3.0 ports (2 rear)
- 3x USB 2.0 ports (2x rear + 1x Type A)
|
| Video/Display | - 2x DP (Display Port), 1x DVI-I from Intel® HD Graphics, 1x VGA from AST2400
- 3x Independent Displays from Processor Graphics, VGA is from AST2400 for BMC KVM
|
| Serial Port / Header | 2x serial headers |
| SuperDOM | 1x SuperDOM (Disk on Module) ports with built-in power |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 3.0
- ACPI 5.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 3.0
- UEFI 2.3.1
- RTC (Real Time Clock) Wakeup
|
| |
Management |
| Software | - AMT
- IPMI 2.0 with KVM support
- NMI
- vPro
- Watch Dog
- SuperDoctor® 5
|
| Power Configurations | - ACPI Power Management
- Keyboard wakeup from soft-off
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-514-407C-1P |
| |
Dimensions and Weight |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 16.9" (429mm) |
| Package | 8" (H) x 24" (W) x 24" (D) |
| Weight | - Gross Weight: 30.4 lbs (13.8 kg)
- Net Weight: 17.6 lbs (8 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
Expansion Slots |
| PCI-Express | 1x PCI-E 3.0 x16 (in x16) slot |
| |
Drive Bays |
| Internal | 2x 2.5" Fixed SATA3 drive bays |
| |
System Cooling |
| Fans | 4x 40x56mm PWM fan; 2x fans for AOC cooling |
| |
Power Supply |
| 400W Platinum level power supply with PMBus and I2C |
| AC Input | 400W: 100-240 V, 50-60 Hz |
| DC Output +5 V standby | 3 A |
| DC Output +12 V | 33 A |
| Certification | Platinum Level |
| |
PC Health Monitoring |
| Voltage | Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
| FAN | - Total of 6 fan headers supporting up to 6 fans
- 6 fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- UID/Remote UID
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- RoHS, Halogen Free
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 0°C to 35°C (32°F to 95°F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
