|
Product SKUs |
SYS-1019S-M2 | SuperServer 1019S-M2 (Black) |
|
Motherboard |
Super X11SSZ-QF |
|
Processor/Cache |
CPU | - Intel® 6th Gen Core i7/i5/i3 series, Intel® Celeron®, Intel® Pentium® processors; CPU TDP support up to 80W TDP
- Single Socket H4 (LGA 1151)
|
|
System Memory |
Memory Capacity | - 4x 288-pin DDR4 DIMM slots
- Up to 64GB DDR4 Non-ECC UDIMM
|
Memory Type | 2133/1866/1600MHz Non-ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
DIMM Sizes | 16GB, 8GB, 4GB |
Memory Voltage | 1.2 V |
|
On-Board Devices |
Chipset | Intel® Q170 Express chipset |
SATA | - SATA3 (6Gbps) via Intel® Q170 Express controller
- RAID 0, 1 support
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
Network Controllers | - Intel® PHY i219LM + Intel® i210AT Gigabit Ethernet LAN Controllers
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
Audio | RealTek ALC 888S High Definition Audio |
Video | ASPEED AST2400 BMC and Intel HD Graphics 530 |
|
Input / Output |
SATA | 2x SATA3 (6Gbps) ports; RAID 0, 1 |
LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | - 2x USB 3.0 ports (2 rear)
- 3x USB 2.0 ports (2x rear + 1x Type A)
|
Video/Display | - 2x DP (Display Port), 1x DVI-I from Intel® HD Graphics, 1x VGA from AST2400
- 3x Independent Displays from Processor Graphics, VGA is from AST2400 for BMC KVM
|
Serial Port / Header | 2x serial headers |
SuperDOM | 1x SuperDOM (Disk on Module) ports with built-in power |
|
System BIOS |
BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 3.0
- ACPI 5.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 3.0
- UEFI 2.3.1
- RTC (Real Time Clock) Wakeup
|
|
Management |
Software | - AMT
- IPMI 2.0 with KVM support
- NMI
- vPro
- Watch Dog
- SuperDoctor® 5
|
Power Configurations | - ACPI Power Management
- Keyboard wakeup from soft-off
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
|
Chassis |
Form Factor | 1U Rackmount |
Model | CSE-514-407C-1P |
|
Dimensions and Weight |
Height | 1.7" (43 mm) |
Width | 17.2" (437mm) |
Depth | 16.9" (429mm) |
Package | 8" (H) x 24" (W) x 24" (D) |
Weight | - Gross Weight: 30.4 lbs (13.8 kg)
- Net Weight: 17.6 lbs (8 kg)
|
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
|
Expansion Slots |
PCI-Express | 1x PCI-E 3.0 x16 (in x16) slot |
|
Drive Bays |
Internal | 2x 2.5" Fixed SATA3 drive bays |
|
System Cooling |
Fans | 4x 40x56mm PWM fan; 2x fans for AOC cooling |
|
Power Supply |
400W Platinum level power supply with PMBus and I2C |
AC Input | 400W: 100-240 V, 50-60 Hz |
DC Output +5 V standby | 3 A |
DC Output +12 V | 33 A |
Certification | Platinum Level |
|
PC Health Monitoring |
Voltage | Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
FAN | - Total of 6 fan headers supporting up to 6 fans
- 6 fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- UID/Remote UID
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
- RoHS, Halogen Free
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 0°C to 35°C (32°F to 95°F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|