| |
Product SKUs |
| AS-2022TG-HTRF | A+ Server 2022TG-HTRF (Black) |
| |
Motherboard |
| Super H8DGT-HF |
| |
Processor/Chipset |
| CPU | - Dual 1944-pin Socket G34
- Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
- HT3.0 Link support
|
| Chipset | AMD chipset SR5670 + SP5100 |
| Note | Supports 6000 processors with Max ACP 80W (TDP 115W) |
| |
System Memory (per node) |
| Memory Capacity | - 16 DIMM sockets
- Support up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 16 DIMMs
- Quad channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type | DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB |
| Memory Voltage | 1.35V or 1.5V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices (per node) |
| SATA | AMD SP5100 (RAID 0, 1) |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers | - Intel® 82576 controller, Dual-Port Gigabit Ethernet
- 10/100/1000BASE-T support
|
| VGA | Matrox G200 16MB DDR2 |
| Super I/O | Winbond® W83527 chip |
| |
Expansion Slots (per node) |
| PCI-E | 1x PCI-E 2.0 x16 |
| |
Input / Output (per Node) |
| SATA | 6x SATA2.0 (3Gb/s) Ports |
| LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB | - 5x USB 2.0 ports
- 2x Rear, 2x header, and 1x Type A
|
| VGA | 1x VGA port |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x serial port header
|
| |
System BIOS (per node) |
| BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | 2U Twin2 Rackmount |
| Model | SC827H-R1400B |
| |
Dimensions (stand-alone chassis / package) |
| Height | 3.47" (88 mm) / 11.22" (285 mm) |
| Width | 17.25" (438 mm) / 26.38" (670 mm) |
| Depth | 28.5" (724 mm) / 39.76" (1010 mm) |
| Gross Weight | 85 lbs / 38.6 kg |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - 4x Power On/Off button
- 4x UID button
|
| LEDs | - 4x Power status LED
- 4x UID LED
- 4x Network activity LEDs
- 4x System overheat / fan failed / power failed LED
|
| |
Drive Bays |
| HDD Bay | - 12x Hot-swap 3.5" SATA HDD
- (3 for each node)
- Enterprise SATA HDD only recommended
|
| |
System Cooling |
| Fans | 4x 80 mm PWM cooling fans |
| |
Power Supply |
| 1400 W high-efficiency (1+1) redundant power supply with PMBus |
| AC Input | - 1100 W Output @ 100-140 V, 13.5-9.5 A, 50-60 Hz
- 1400 W Output @ 180-240 V, 9.5-7.0 A, 50-60 Hz
|
| DC Output | - 1100 W: +12 V / 92 A; +5V sb / 4 A
- 1400 W: +12 V / 116 A; +5 V sb / 4 A
|
| With Distributor | - +5 V: 30 A
- +3.3V: 24 A
- -12V: 0.6 A
|
| Certification | Gold Certified |
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
| FAN | - Up to 4-fan status tachometer monitoring
- Up to four 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control (4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal control for 8x Fan connectors
- I²C temperature sensing logic
|
| LED | - CPU / System Overheat LED
- +5 V Standby Alert LED
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
