Consulting & ordering +49 4181 23577-10
Server specialist since 1999
Directly from Value-Added Distributor
PLEASE NOTE!

From 08. July 2019 we can be reached at the following telephone number:

+49 4181 2357780

You are here: Homepage > Shop > > > > Supermicro AS-2022TG-HTRF Twin² AMD Opteron Server

Lingua:    


Supermicro AS-2022TG-HTRF Twin² AMD Opteron Server

19" 2U Twin² with 4 Nodes, Dual AMD Opteron 6100/6200, red.

Supermicro AS-2022TG-HTRF Twin² AMD Opteron Server
Picture may differ from original product
Numero Articolo.:
AS-2022TG-HTRF

Numero Produttore.:

AS-2022TG-HTRF


Prezzo solo
2.993,00 € *

In arrivo:
probabile pronto per la spedizione in ca.
3-5 giorni lavorativi

Request exact delivery time


Pezzi
Supermicro

Descrizione

Produttore: Supermicro

Supermicro AS-2022TG-HTRF Twin² AMD Opteron Server

  • Four hot-pluggable
  • Dual AMD Opteron™ 6000 series (6300P* ready) processors (Socket G34) 16/12/8/4-Core ready; HT3.0 Link support
  • Up to 512 GB DDR3 1600 MHz ECC registered DIMM; 16x DIMM sockets
  • 1x Low-profile PCI-E 2.0 in x16 slot (For add-on card up to 5.9"in length)
  • Dual-port GbE LAN Controller, 5x USB 2.0 ports, 1x dedicated LAN for system management (IPMI 2.0)
  • 3x Hot-swap SATA Drive Bays (RAID 0, 1)
  • 1400W High-efficiency Redundant Power Supplies; Gold Certified
 

Product SKUs

AS-2022TG-HTRFA+ Server 2022TG-HTRF (Black)
 

Motherboard

Super H8DGT-HF
 

Processor/Chipset

CPU
  • Dual 1944-pin Socket G34
  • Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
ChipsetAMD chipset SR5670 + SP5100
NoteSupports 6000 processors with Max ACP 80W (TDP 115W)
 

System Memory (per node)

Memory Capacity
  • 16 DIMM sockets
  • Support up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 16 DIMMs
  • Quad channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory TypeDDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes1GB, 2GB, 4GB, 8GB, 16GB
Memory Voltage1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 

On-Board Devices (per node)

SATAAMD SP5100 (RAID 0, 1)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 controller, Dual-Port Gigabit Ethernet
  • 10/100/1000BASE-T support
VGAMatrox G200 16MB DDR2
Super I/OWinbond® W83527 chip
 

Expansion Slots (per node)

PCI-E1x PCI-E 2.0 x16
 

Input / Output (per Node)

SATA6x SATA2.0 (3Gb/s) Ports
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 5x USB 2.0 ports
  • 2x Rear, 2x header, and 1x Type A
VGA1x VGA port
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x serial port header
 

System BIOS (per node)

BIOS Type16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
 

Chassis

Form Factor2U Twin2 Rackmount
ModelSC827H-R1400B
 

Dimensions (stand-alone chassis / package)

Height3.47" (88 mm) / 11.22" (285 mm)
Width17.25" (438 mm) / 26.38" (670 mm)
Depth28.5" (724 mm) / 39.76" (1010 mm)
Gross Weight85 lbs / 38.6 kg
Available ColorsBlack
 

Front Panel

Buttons
  • 4x Power On/Off button
  • 4x UID button
LEDs
  • 4x Power status LED
  • 4x UID LED
  • 4x Network activity LEDs
  • 4x System overheat / fan failed / power failed LED
 

Drive Bays

HDD Bay
  • 12x Hot-swap 3.5" SATA HDD
  • (3 for each node)
  • Enterprise SATA HDD only recommended
 

System Cooling

Fans4x 80 mm PWM cooling fans
 

Power Supply

1400 W high-efficiency (1+1) redundant power supply with PMBus
AC Input
  • 1100 W Output @ 100-140 V, 13.5-9.5 A, 50-60 Hz
  • 1400 W Output @ 180-240 V, 9.5-7.0 A, 50-60 Hz
DC Output
  • 1100 W: +12 V / 92 A; +5V sb / 4 A
  • 1400 W: +12 V / 116 A; +5 V sb / 4 A
With Distributor
  • +5 V: 30 A
  • +3.3V: 24 A
  • -12V: 0.6 A
CertificationGold Certified
 

PC Health Monitoring

CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 4-fan status tachometer monitoring
  • Up to four 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal control for 8x Fan connectors
  • I²C temperature sensing logic
LED
  • CPU / System Overheat LED
  • +5 V Standby Alert LED
 

Operating Environment / Compliance

RoHSRoHS Compliant
Environmental Specifications
  • Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
  • Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
  • Operating relative humidity: 8% to 90% (non-condensing)
  • Non-operating relative humidity: 5% to 95% (non-condensing)