| |
Product SKUs |
| MBD-X9SCI-LN4 -B | X9SCI-LN4 (Bulk Pack) |
| |
Physical Stats |
| Form Factor | ATX |
| Dimensions | 12" x 9.6" (30.48 cm x 24.4 cm) |
| |
Processor/Cache |
| CPU | - Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron processors *** *
- Socket H2 (LGA 1155)
|
| |
System Memory |
| Memory Capacity | - 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC unbuffered memory (UDIMM)
|
| Memory Type | 1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C204 PCH chipset |
| SATA | - SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6Gb/s with RAID 0, 1
|
| VGA | BMC integrated Matrox G200 |
| Super I/O | Nuvoton WPCM450RA0BX |
| |
Input / Output |
| Serial ATA | 6x SATA ports total (4x 3Gb, 2x 6Gb) |
| LAN | 4x RJ45 Gigabit Ethernet LAN ports |
| USB | 8x USB 2.0 ports total(2x rear + 6x via header) |
| VGA | 1x VGA port |
| Serial Port / Header | 2x Fast UART 16550 serial port(one header and one rear port) |
| DOM | 1x DOM (Disk on Module) power connector |
| TPM | 1x TPM 1.2 20-pin Header |
| |
Chassis ( Optimized for X9SCI-LN4
) |
| 1U Chassis | - CSE-113MTQ-330CB
- CSE-113MTQ-R400CB
- CSE-512F-350B
- CSE-512F-441B
- CSE-811TQ-441B
- CSE-813MTQ-350C
- CSE-813MTQ-441CB
|
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
| |
Expansion Slots |
| PCI-Express | - 1 (x16) PCI-E 3.0 slot***
- 1x PCI 32-bit slot
|
| |
System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - DMI (SMBIOS) 2.7
- ACPI 4.0
- PCI 2.3
- USB Keyboard support
|
| |
Management |
| Software | - SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU cores, +1.8 V, +3.3 V, +5 V, ±12 V, +3.3 V Standby, +5 V Standby, VBAT, HT, Memory, chipset voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375 V - 1.60 V
|
| FAN | - Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- +5 V Standby alert LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
OS compatibility |
| Please see our OS Compatibility Chart |
0 Artikel
