|
Product SKUs |
MBD-X8ST3-F
-O | - X8ST3-F
- (Standard Retail Pack)
|
MBD-X8ST3-F
-B | |
|
Physical Stats |
Form Factor | ATX |
Dimensions | 12" x 10" (30.5cm x 25.4cm) |
|
Processor/Cache |
CPU | - LGA 1366 Socket
- Intel® Core? i7 990X, i7-980X, i7-975 and i7-965 Extreme Edition
- Intel® Core? i7 series
- Intel Xeon 5600/5500 series
- Intel Xeon 3600/3500 series
|
System Bus | QPI (up to 6.4 GT/s) |
|
System Memory |
Memory Capacity | - Supports up to 24 GB 1333 / 1066 / 800 MHz DDR3 ECC / non-ECC unbuffered memory
- Three Channel memory bus
- 6 DIMM sockets
|
Memory Type | 1333 / 1066 / 800MHz unbuffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB |
Memory Voltage | 1.5 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
|
On-Board Devices |
Chipset | - Intel X58 Express chipset
- ICH10R
|
SAS | - LSI SAS1068E
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
|
SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
Network Controllers | - 2x Intel 82574L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
VGA | Matrox G200eW 16 MB DDR2 |
Super I/O | Winbond 83627DHG chip |
Clock Generator | CK505 |
|
Input / Output |
SAS | 8x SAS / SATA ports |
Serial ATA | - 6 SATA ports
- 6 SATA hard drives supported
|
Floppy | 1x Floppy controller; 1.44 MB |
LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | - 2x USB rear ports
- 2x USB on-board
- 2x USB internal headers (4 ports)
- Total 8x USB 2.0 Compliant
|
VGA | 1x VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
|
|
I/O Panel |
Please see this board's I/O Panel |
|
OS compatibility |
Please see our OS Compatibility Chart |
|
Chassis ( Optimized for X8ST3-F
) |
2U Chassis | - CSE-213A-R900LPB
- CSE-216A-R900LPB
- CSE-216E1-R900LPB
- CSE-216E2-R900LPB
- CSE-822T-400LPB
- CSE-825MTQ-R700LPB
- CSE-825TQ-560LPB
- CSE-825TQ-R700LPB
- CSE-826TQ-R800LPB
|
Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
|
Expansion Slots |
PCI-Express | - 3 (x8) PCI-e 2.0 slots (1 using x16 slot)
- 1x (x4) PCI-e slot (using x8 slot)
|
PCI | 2x 32-bit PCI slot |
|
System BIOS |
BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
Management |
Software | - IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
|
PC Health Monitoring |
Voltage | - Monitors for CPU cores, +1.8 V, +3.3 V, +5 V, ±12 V, +3.3 V Standby, +5 V Standby, VBAT, HT, Memory, chipset voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375 V-1.60 V
|
FAN | - Total of five fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - CPU / System Overheat LED
- +5 V Standby alert LED
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 6/6, Pb Free |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|