| |
Product SKUs |
| MBD-X8QB6-F
-O | - X8QB6-F
- (Standard Retail Pack)
|
| MBD-X8QB6-F
-B | |
| |
Physical Stats |
| Form Factor | Proprietary |
| Dimensions | 16.4" x 16.79" (41.66cm x 42.65cm) |
| |
Processor/Cache |
| CPU | - Quad 1567-pin LGA Sockets
- Supports up to four Intel Xeon 64-bit processor(s) of the same type below:
- Intel Xeon processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel Xeon processors E7-4800 family (10-core, codename Westmere-EX)
|
| QPI | Up to 6.4 GT/s |
| |
System Memory |
| Memory Capacity | - 32x 240-pin DIMM sockets
- Supports up to 1024 GB 1066 / 978 / 800MHz DDR3 ECC Registered memory
- Memory Mirroring supported
|
| Memory Type | 1333* / 1066 / 978 / 800MHz ECC registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | - 1GB, 2GB, 4GB
- , 8 GB
- , 32 GB**
|
| Memory Voltage | 1.5 V, 1.35 V** |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel 7500 (Boxboro-EX) chipset
- ICH10R
|
| SAS | - LSI 6Gb/s SAS 2108 (512MB cache)
- RAID 0, 1, 5, 6, 10, 50, 60 support
- BBU (Battery Backup Unit) Extension Kit
|
| SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| Network Controllers | - Intel 82576 Dual-Port Gigabit Ethernet controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics | Matrox G200eW 16 MB DDR2 |
| Super I/O | Winbond 83527HB chip |
| |
Input / Output |
| SAS | 8x 6Gb/s SAS / SATA ports |
| Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
| LAN | 3x RJ45 LAN ports |
| USB | - 2x USB rear ports
- 2x USB internal headers (3 ports)
- Total 5x USB 2.0 Compliant
|
| VGA | 1x VGA Port |
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header
|
| |
Chassis ( Optimized for X8QB6-F
) |
| Tower / 4 U Rackmount | - CSE-418E16-R1K62B
- CSE-848A-R1K62B
- CSE-848E16-R1K62B
- (for SC748, rev. K required, Air Shroud MCP-310-74805-0B)
- (for SC848 & 418, rev. K required, Air Shroud MCP-310-84803-0B)
|
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
| |
Expansion Slots |
| PCI-Express | 2 (x16) PCI-E 2.0 or 1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or 4 (x8) PCI-E 2.0 slots |
| |
System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
Management |
| Software | - IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
|
| Power Configurations | ACPI / ACPM Power Management |
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU cores, +1.2 V, 1.5 V, +3.3 V, +12 V, (+3 V, 1.0 V, 1.2 V, 1.8 V, 1.1 V) Standby, VBAT, Memory, chipset voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6 V-1.35 V
|
| FAN | - Total of 10 fan headers supporting up to 10 fans
- Ten 4-pin fan headers
- 10x fans with tachometer status monitoring
- Support 4-pin fans (w/o speed control)
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Artikel
