Beratung & Bestellung 04181 23577-10
Server Spezialist seit 20 Jahren
Direkt vom Value Added Distributor
PLEASE NOTE!

From 08. July 2019 we can be reached at the following telephone number:

+49 4181 2357780

Sie sind hier: Startseite > Shop > > Supermicro X8DTT-H Server Mainboard

Sprache:    


Supermicro X8DTT-H Server Mainboard

Twin Server Mainboard, Xeon 5500, 96 GB, bulk

Supermicro X8DTT-H Server Mainboard
Abbildung kann vom Original abweichen
Artikelnr.:
SM-X8DTT-H

Herstellernr.:

MBD-X8DTT-H


Nicht mehr lieferbar

Supermicro
Offizieller Distributor & Systemintegrator Seit 1999 sind wir einer der ersten Distributoren und Systemintegratoren Deutschlands und können somit ein hervorragendes Preis- Leistungs-Verhältnis und umfangreiche Serviceangebote bieten.

Beschreibung

Hersteller: Supermicro

Supermicro X8DTT-H Server Mainboard

  • Intel Xeon processor 5600/5500 series, with QPI up to 6.4 GT/s
  • Intel® 5500 (Tylersburg) Chipset
  • Up to 192 GB** DDR3 1333/ 1066/ 800 MHz ECC registered DIMM / 48 GB unbuffered DIMM
  • Dual Intel 82574L Gigabit Ethernet controllers
  • 1x (x16) PCI-E 2.0 slot
  • Integrated Matrox G200eW Graphics
 

Product SKUs

MBD-X8DTT-H-BX8DTT-H(Bulk Pack)
 

Physical Stats

Form FactorProprietary
Dimensions16.64" x 6.8 " (42.26cm x 17.27cm)
 

Processor/Cache

CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
  • Intel Xeonprocessor 5600 Series (Westmere)
  • Intel Xeonprocessor 5500 Series (Nehalem-EP)
QPIUp to 6.4 GT/s
 

System Memory

Memory Capacity
  • 12x 240-pin DIMM sockets
  • Supports up to 192 GB** 1333 / 1066 / 800 MHz DDR3 ECC registered memory
  • Supports up to 48 GB 1333 / 1066 / 800 MHz DDR3 ECC / Non ECC unbuffered memory
  • Memory Mirroring supported
Memory Type1333 / 1066 / 800MHz ECC registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB
  • , 8 GB**
  • , 16 GB**
Memory Voltage1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel x4 and x8 Single Device Data Correction (SDDC)
 

On-Board Devices

Chipset
  • Intel 5500 (Tylersburg) chipset
  • ICH10R
SATA
  • Intel ICH10R SATA 3.0 Gb/s controller
  • RAID 0, 1, 5, 10 support (Windows)
  • RAID 0, 1, 10 support (Linux)
Network Controllers
  • Dual Intel 82574L Gigabit Ethernet controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
GraphicsMatrox G200eW
Super I/OWinbond W83527HG chip
Clock Generator932S421 chip
 

Chassis ( Optimized for X8DTT-H)

2U Chassis
  • CSE-217HQ-R1400B
  • CSE-827H-R1200B
  • CSE-827H-R1400B
  • CSE-827HD-R1400B
  • CSE-827T-R1200B
Important Chassis NotesTo support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
 

Expansion Slots

PCI-Express1x (x16) PCI-E 2.0 slot
 

Input / Output

Serial ATA
  • Four SATA ports
  • Four SATA hard drives supported
  • Note: Requires BPN-827ADP-X8-H adapter
LAN2x RJ45 LAN ports
USB
  • 2x rear + 1x header (2x Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA1x VGA Port
Serial Port1x Fast UART 16550 serial port
 

System BIOS

BIOS Type32Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
 

Management

Software
  • SuperDoctor® III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI Power Management
  • Main Switch Override Mechanism
  • Power-on mode for AC power recovery
 

PC Health Monitoring

Voltage
  • Monitors for CPU cores,+1.5 V, +3.3 V, +5 V, +12 V, +5 Stdby, +3.3 Stdby, VBAT, Memory voltages.
  • CPU core 6-Phase-switching voltage regulator
FAN
  • Total of four 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control (4-pin fan only)
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • PSU I²C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Power Fail / Overheat LED
  • Supsend-State Indicator LED
  • UID LED
Other FeaturesSDDC Support
 

Operating Environment / Compliance

RoHSRoHS Compliant 6/6, Pb Free
Environmental Specifications
  • Operating Temperature: 10° to 35 °C (50° to 95 °F)
  • Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
  • Operating relative humidity: 8% to 90% (non-condensing)
  • Non-operating relative humidity: 5 to 95% (non-condensing)