|
Product SKUs |
MBD-X8DTN+-O | - X8DTN+
- (Standard Retail Pack)
|
MBD-X8DTN+-B | |
|
Physical Stats |
Form Factor | Enhanced Extended ATX |
Dimensions | 13.68" x 13" (34.7cm x 33cm) |
|
Processor/Cache |
CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Intel Xeonprocessor 5600 Series (Westmere)
- Intel Xeonprocessor 5500 Series (Nehalem-EP)
|
QPI | Up to 6.4 GT/s |
|
System Memory |
Memory Capacity | - 18x 240-pin DIMM sockets
- Supports up to 288 GB 1333 / 1066 / 800 MHz DDR3 ECC registered memory
- Supports up to 48 GB 1333 / 1066 / 800 MHz DDR3 ECC / Non ECC unbuffered memory
- Memory Mirroring supported
|
Memory Type | 1333 / 1066 / 800MHz ECC registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | - 1GB, 2GB, 4GB
- , 8 GB
- , 16 GB
|
Memory Voltage | 1.5 V / 1.35 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
Note: | This board does not support LRDIMM memory. |
|
On-Board Devices |
Chipset | - Intel 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
|
SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
IPMI | - Supports for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMLP)
- (Optional: AOC-SIMLP-B(+))
- (Optional: AOC-SIMLP-3(+)) with 3rd LAN support
- NOTE: Supports chassis 2U and up
|
Network Controllers | - Intel 82576 Dual-Port Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
|
Graphics | ATI ES1000 controller with 32 MB of video memory |
Super I/O | Winbond 83627HF chip |
|
Input / Output |
Serial ATA | - 6 Serial ATA ports
- 6 SATA hard drives supported
|
IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy | 1x Floppy controller; 1.44 MB |
LAN | 2 RJ45 LAN ports |
USB | - 2 USB rear ports
- 2 USB on-board
- 2 USB internal headers(3 ports)
- 7 total USB ports, 2.0 Compliant
|
VGA | 1 VGA Port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | - 1x Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (opt)
|
|
Chassis ( Optimized for X8DTN+
) |
2U Chassis | - CSE-213A-R900LPB
- CSE-216A-R900LPB
- CSE-216E16-R920LPB
- CSE-216E26-R920LPB
- CSE-826A-R1200LPB
- CSE-826TQ-R800LPB
|
3U Chassis | - CSE-836E16-R1200B
- CSE-836E26-R1200B
- CSE-936A-R900B
- CSE-936E1-R900
- CSE-936E16-R1200B
- CSE-936E26-R1200B
|
Tower / 4 U Rackmount | - CSE-745TQ-800B
- CSE-846E16-R1200B
- CSE-846E26-R1200B
- CSE-846TQ-R900B
- CSE-847A-R1400LPB
- CSE-847E1-R1400LPB
- CSE-847E16-R1400LPB
- CSE-847E2-R1400LPB
- CSE-847E26-R1400LPB
|
Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
|
Expansion Slots |
PCI-Express | - 2 (x8) PCI-E slots (1 in x16 slot)
- 1x (x4) PCI-E slot (in x8 slot)
|
PCI-X | - 1x 64-bit 133MHz PCI-X (3.3V) slots
- 2x 64-bit 133/100MHz PCI-X (3.3V) slots
|
UIO | 1x UIO slot (PCI-E 2.0 x8 slot) |
|
System BIOS |
BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
Management |
Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0 / 1.5
- SuperDoctor® III
|
Power Configurations | ACPI / ACPM Power Management |
|
PC Health Monitoring |
Voltage | - Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT Voltages.
- 5-Phase-switching voltage regulator
|
FAN | - Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control (4-pin fan only)
|
Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 6/6, Pb Free |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
|
OS compatibility |
Please see our OS Compatibility Chart |