|
Product SKUs |
MBD-X7SBU-O | X7SBU (Standard Retail Pack) |
MBD-X7SBU-B | X7SBU (Bulk Pack) |
|
Physical Stats |
Form Factor | Proprietary |
Dimensions | 8" x 13" (20.32cm x 33.02cm) |
|
Processor/Cache |
CPU | - Single LGA775 ZIF Socket
- Supports Quad-Core Intel Xeon X3300/X3200 series
- Supports Dual-Core Intel Xeon E3100/3000 series
- Supports Intel Xeon processor L3360 and L3110 series
- Supports Intel® Core?2 Quad Q9000/Q8000/Q6000 series
- Supports Intel® Core?2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel Pentium E5000/E2000 series
- Supports Intel Celeron E1000 and 400 series
- NOTE: 1600 MHz CPU has to use 1600 MHz XMP memory
|
System Bus | 1600 / 1333 / 1066 / 800 MHz system bus |
|
System Memory |
Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, non-ECC DDR3 1333/1066/800 MHz memory (Dual Channel) or up to 4 GB Non-ECC 1600 MHz XMP DDR3 memory
|
Memory Type | DDR3 1333/1066/800 MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs or Non-ECC 1600 MHz XMP DDR3 memory |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
Memory Voltage | Dynamic (1.5V to 1.9V) |
|
On-Board Devices |
Chipset | - Intel X48 chipset
- ICH9R + Intel 82573V + Intel 82573L
|
Serial ATA | - Intel ICH9R SB SATA controller built-in (3 Gb/s)
- RAID 0, 1, 5, 10 (Windows Only)
- RAID 0, 1, 10 support(Linux)
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM over LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO-HTC, AOC-SIMSO+)
- NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function
|
Network Controllers | - 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel 82573V + Intel 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
VGA | On-board ATI ES1000 (32MB) graphics |
Super I/O | Winbond 83627HG chip |
Clock Generator | IDTCV183-1 |
|
Input / Output |
Serial ATA | - Six Serial ATA ports (3 Gb/s performance)
- Six SATA hard drives supported
- External SATA supported
|
IDE | - One EIDE channel supports up to two UDMA/IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy | 1x Floppy controller; 1.44 MB |
LAN | 2x RJ45 LAN ports |
USB | - Up to 8x USB 2.0 / 1.1 compliant ports
- 2x rear ports + 2x Type A connectors + 2x internal headers (4 ports)
|
VGA | 1x VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | - 1x Fast UART 16550 serial port
- 1x internal header
|
|
Chassis ( Optimized for X7SBU ) |
1U | - CSE-815TQ-R450U
- CSE-815TQ-560U
- CSE-812L-280U
|
2U | CSE-825TQ-R700U |
Important Note | For a general system, a 420W (minimum) ATX12V power supply [8-pin +12V AND 24-pin is recommended to assure system stability]. |
|
Expansion Slots |
PCI-Express | - 2 (x8) PCI-e slot (using x16 slot)
- 1x (x4) PCI-e slot (using x8 slot)
|
UIO | 1 UIO riser slot |
|
System BIOS |
BIOS Type | 16Mb Flash EEPROM with Phoenix BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0 / 2.0 (S3 Optional)
- USB Keyboard support
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
|
|
Management |
Software | - Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
Power Configurations | - ACPI / ACPM Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal / External modem ring-on
|
|
PC Health Monitoring |
Voltage | - Monitors for CPU cores ( +1.8 V, +3.3 V, +5, ±12 V, +3.3 V Standby, +5 V Standby, VBAT, HT, Memory, chipset)
- CPU core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
|
FAN | - Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status Monitor with firmware / software speed control
- Supports 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
- PECI
|
LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- +5 V Standby power alert LED
- UID / Remote UID
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 6/6, Pb Free |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
|
OS compatibility |
Please see our OS Compatibility Chart |