|
Product SKUs |
MBD-X7SBT
-B | |
|
Physical Stats |
Form Factor | Proprietary |
Dimensions | 16" x 6.5 ", (40.64cm x 16.51 cm) |
|
Processor/Cache |
CPU | - Single LGA775 ZIF Socket
- Supports Quad-Core Intel Xeon X3300/X3200 series
- Supports Dual-Core Intel Xeon E3100/3000 series
- Supports Intel Xeon processor L3360 and L3110 series
- Supports Intel® Core?2 Quad Q9000/Q8000/Q6000 series
- Supports Intel® Core?2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel Pentium E5000/E2000 series
- Supports Intel Celeron E1000 and 400 series
- NOTE: 1600 MHz CPU has to use 1600 MHz XMP memory
|
System Bus | 1600 / 1333 / 1066 / 800 MHz system bus |
|
System Memory |
Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, non-ECC DDR3 1333/1066/800 MHz memory (Dual Channel) or up to 4 GB Non-ECC 1600 MHz XMP DDR3 memory
|
Memory Type | DDR3 1333/1066/800 MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs or Non-ECC 1600 MHz XMP DDR3 memory |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
Memory Voltage | Dynamic (1.5V to 1.9V) |
|
On-Board Devices |
Chipset | - Intel X48 chipset
- ICH9R + Intel 82573V + Intel 82573L
|
Serial ATA | - Intel ICH9R SATA-2 controller built-in (3 Gb/s)
- RAID 0, 1, 5, 10 (Windows)
- RAID 0, 1, 10 (Linux)
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM over LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO-HTC, AOC-SIMSO+)
- NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function
|
Network Controllers | - 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel 82573V + Intel 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
VGA | On-board XGI Volari Z9S (32MB) graphics |
Super I/O | Winbond 83627DHG chip |
Clock Generator | IDT CV152 |
|
Input / Output |
Serial ATA | - Four SATA ports (3 Gb/s performance)
- Four SATA hard drives supported
|
LAN | 2x RJ45 LAN ports |
USB | - Up to 8x USB 2.0 / 1.1 compliant ports
- 2x rear ports + 2x internal headers + 2x Type A ports
|
VGA | 1x VGA port |
Serial Ports | - 1x Fast UART 16550 serial port
- 1x internal header
|
|
Chassis ( Optimized for X7SBT
) |
1U Chassis | - CSE-808T-780B
- CSE-808LT-780B
- CSE-809T-780B
- CSE-809LT-780B
|
|
Expansion Slots |
PCI-Express | 1x (x16) PCI-E 2.0 slot |
|
System BIOS |
BIOS Type | 16Mb Flash EEPROM with Phoenix BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0 / 2.0 (S3 Optional)
- ACPI 1.0 (limited)
- USB Keyboard support
- Hardware BIOS Virus protection
|
|
Management |
Software | - SuperDoctor® III
- Watch Dog
- NMI
|
Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Keyboard wakeup from soft-off
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
|
|
PC Health Monitoring |
Voltage | - Monitors for CPU cores ( +1.8 V, +3.3 V, +5, ±12 V, +3.3 V Standby, +5 V Standby, VBAT, HT, Memory, chipset)
- CPU core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
|
FAN | - Total of three 4-pin fan headers
- 3x fans with tachometer monitoring
- Status Monitor with firmware / software speed control
- Status monitor for on/off control
- Low noise fan speed control
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
- PECI
|
LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 6/6, Pb Free |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
|
OS compatibility |
Please see our OS Compatibility Chart |