|
Product SKUs |
MBD-X7DWT-B | X7DWT (Bulk Pack) |
|
Physical Stats |
Form Factor | Proprietary |
Dimensions | 16.4" x 6.5 " (41.66cm x 16.5cm) |
|
Processor/Cache |
CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel 64-bit Xeonprocessor(s) of the same type below:
- Quad-Core Intel XeonProcessor 5400/5300LV sequence (Harpertown/Clovertown processor)
- up to 3.20 GHz
- Dual-Core Intel Xeon processor 5200/5100 LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
System Bus | 1600 / 1333 / 1066 MHz system bus |
|
System Memory |
Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 64 GB 800* / 667 / 533 MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Sparing supported
|
Memory Type | 800* / 667 / 533 MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 512 MB, 1GB, 2GB, 4GB, 8GB** |
Memory Voltage | 1.8 V or 1.5 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
|
On-Board Devices |
Chipset | - Intel 5400 (Seaburg) chipset
- ESB2
|
SATA | - Intel ESB2 SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0, v.1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
|
Network Controllers | - 2 Intel (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT support for fast, scaleable, and reliable networking
|
Graphics | ATI ES1000 controller with 32 MB of video memory |
Super I/O | Winbond 83627HF chip |
Clock Generator | CK410B |
|
Input / Output |
Serial ATA | Four SATA ports |
LAN | 2x RJ45 LAN ports |
USB | - 2x USB rear ports
- 2x USB internal headers
- Total 4x USB 2.0 Compliant
|
VGA | 1x VGA Port |
Serial Port | 1x Fast UART 16550 serial port |
|
Chassis ( Optimized for X7DWT ) |
1U | SC808T-980 |
|
Expansion Slots |
PCI-Express | 1 (x16) PCI-e Generation II slots |
|
System BIOS |
BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
Management |
Software | - Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
|
|
PC Health Monitoring |
Voltage | - Monitors for CPU cores,+1.5 V, +3.3 V, +5 V, ±12 V, +3.3 V Stdby, +5 Stdby, VBAT, HT, Memory, chipset
- 6-Phase-switching voltage regulator with auto-sense from 0.8375 V-1.60 V
|
FAN | - Total of four proprietary fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | CPU / System Overheat LED |
Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 6/6, Pb Free |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|