| |
Product SKUs |
| MBD-X7DGU
-B | |
| |
Physical Stats |
| Form Factor | Proprietary |
| Dimensions | 12" x 13" (30.5cm x 33.2cm) |
| |
Processor/Cache |
| CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Quad-Core Intel XeonProcessor 5400/5300 sequence
- (Harpertown/Clovertown processor) up to 3.16 GHz
- Dual-Core Intel Xeon processor 5200/5100/5000 sequence (Wolfdale)
- (Woodcrest/Dempsey processor) up to 3.40 GHz
|
| System Bus | 1333 / 1066 / 667 MHz system bus |
| Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
| |
System Memory |
| Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533 MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
| Memory Type | 667 / 533 MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB |
| Memory Voltage | |
| |
On-Board Devices |
| Chipset | - Intel 5000X (Greencreek) chipset
- chipset
- ESB2
|
| Clock Generator | IDT CV152 |
| SATA | - Intel SB SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMSO)
- (Optional: AOC-SIMSO/+)
- For dedicated LAN, cable CBL-0177L must be used (cable sold separately)
|
| Network Controllers | Intel (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet controller |
| Graphics | ATI ES1000 controller with 16 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| |
Input / Output |
| Serial ATA | Six Serial ATA ports |
| IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy | 1x Floppy controller; 1.44 MB, 2.88 MB |
| LAN | 2x RJ45 LAN ports |
| USB | - 2x USB rear ports
- 3x USB internal headers
- Total 5x USB 2.0 Compliant / 1.1 Compliant
|
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header
|
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
|
| |
Chassis ( Optimized for X7DGU
) |
| 1U Chassis | - CSE-815TQ-R650U
- CSE-815S-560U
- CSE-812L-520U
|
| 2U Chassis | - CSE-825TQ-560U
- CSE-825TQ-R700U
|
| Important Chassis Notes | - To ensure system stability, a 550W (minimum) ATX power supply
- [4-pin (+12V), 8-pin (+12V) and 20-pin are required]
|
| |
Expansion Slots |
| PCI-Express / PCI-X / UIO | - Left Side 1 (x16) PCI-Express slot
- Right Side
- 1 64-bit 133MHz PCI-X or
- 1x (x8) PCI-Express
|
| |
Management |
| Software | - Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory Voltage, Chipset Voltage
- 5-Phase-switching voltage regulator with auto-sense from 0.8375 V - 1.60 V
|
| FAN | - Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Supports 3-pin speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- UID / Remote UID LED ( IPMI Only )
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 5/6, Server Exemption |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
| |
OS compatibility |
| Please see our OS Compatibility Chart |
| |
Regulatory |
| FCC | Class B |
0 Artikel
