| |
Product SKUs |
| MBD-X7DCT-B | X7DCT(Bulk Pack) |
| |
Physical Stats |
| Form Factor | Proprietary |
| Dimensions | 16.4" x 6.5 " (41.66cm x 16.51cm) |
| |
Processor/Cache |
| CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel 64-bit Xeonprocessor(s) of the same type below:
- Quad-Core Intel XeonProcessor 5400/5300 sequence (Harpertown/Clovertown processor) up to 3.16 GHz
- Dual-Core Intel Xeon processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
| Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
| |
System Memory |
| Memory Capacity | - Six 240-pin DIMM sockets
- Supports up to 48 GB 667/533 MHz DDR2 ECC registered DIMM memory
- Dual channels memory bus
|
| Memory Type | 677/533 MHz ECC Register DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB** |
| Memory Voltage | 1.8 V only |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel 5100 (San Clemente) chipset
- Intel ICH9R SB
|
| SATA | - Intel ICH9R SB SATA-2 controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
- KVM feature is available with dedicated LAN only
|
| Network Controllers | - Intel 82573V & 82573L Gigabit Ethernet controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT support for fast, scaleable, and reliable networking
|
| Graphics | ATI ES1000 controller with 32 MB of video memory |
| Super I/O | Winbond W83627HG chip |
| Clock Generator | ICS9LPR501 chip |
| |
Input / Output |
| Serial ATA | - Four SATA ports
- Four SATA hard drives supported
|
| LAN | 2x RJ45 LAN ports |
| USB | - 2x rear + 1x Type A connector + 2x headers (2 Ports)
- 5x total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA | 1x VGA Port |
| Serial Port / Header | 1x Fast UART 16550 serial port |
| |
Chassis ( Optimized for X7DCT) |
| |
Expansion Slots |
| PCI-Express | 1x (x16) PCI-e slot |
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0/3.0
- USB Keyboard support
- Hardware BIOS Virus protection
|
| |
Management |
| Software | - Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU cores,+1.5 V, +3.3 V, +5 V, ±12 V, +5 Stdby, VBAT
- CPU core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN | - Total of three 4-pin fans
- 3x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 3x Fan Connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
|
| Other Features | SDDC Support |
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Artikel
