|
Product SKUs |
MBD-X7DCL-i-O | X7DCL-i(Standard Retail Pack) |
MBD-X7DCL-i-B | X7DCL-i(Bulk Pack) |
|
Physical Stats |
Form Factor | ATX |
Dimensions | 12.05" x 10" (30.6cm x 25.4cm) |
|
Processor/Cache |
CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel 64-bit Xeonprocessor(s) of the same type below:
- Quad-Core Intel XeonProcessor 5400/5300 sequence (Harpertown/Clovertown processor) up to 3.16 GHz
- Dual-Core Intel Xeon processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
|
System Memory |
Memory Capacity | - Six 240-pin DIMM sockets
- Supports up to 48 GB 667/ 533 MHz DDR2 ECC registered Single/Dual Rank memory *
- Dual channel memory bus
- Memory must be populated in pairs
|
Memory Type | 667/533 MHz Register DDR2 ECC Single/Dual Rank SDRAM 72-bit, 240-pin gold-plated DIMMs * |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB, 8 GB** |
Memory Voltage | 1.8 V only |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
|
On-Board Devices |
Chipset | - Intel 5100 (San Clemente) chipset
- Intel ICH9R
|
SATA | - Intel ICH9R SB SATA-2 controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMLC)
- (Optional: AOC-SIMLC)
- NOTE: KVM-over-LAN supported w/ AOC-SIM1U+ - PCB 1.1 A only
|
Network Controllers | - Intel 82573V & 82573L Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
Graphics | XGI Z9 with 32 MB of video memory |
Super I/O | Winbond W83627HG-AW chip |
Clock Generator | CK505 chip |
|
Input / Output |
Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
IDE | - Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- Compact Flash (40-pin connector, IDE 1, single channel) slot
|
Floppy | 1x Floppy controller; 1.44 MB, 2.88 MB |
LAN | 2x RJ45 LAN ports |
USB | - 2x USB rear ports
- 3x USB internal header
- 5x total USB ports, 2.0 Compliant / 1.1 Compliant
|
VGA | 1x VGA Port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Header
|
|
Chassis ( Optimized for X7DCL-i) |
1U Chassis | - CSE-512F-520
- CSE-512F-280
- CSE-513L-420
- CSE-811TQ-520
- CSE-811TQ-280
- CSE-811i-520
- CSE-811i-280
- CSE-813MTQ-520C
- CSE-813MTQ-280C
- CSE-813MT-420C
- CSE-813MT-410C
|
2U Chassis | - CSE-523L-520
- CSE-823TQ-550LP
- CSE-823T-550LP
- CSE-823i-550
- CSE-823MTQ-R700LP
- CSE-825TQ-560LP
- CSE-825MTQ-R700LP
|
Mid Tower | - CSE-733TQ-645
- CSE-733TQ-465
- CSE-733i-645
- CSE-733i-465
|
Tower / 4 U Rackmount | |
Important Chassis Notes | To ensure system stability, a 500W (minimum) ATX power supply [ 8-pin (+12V) and 24-pin are required] |
|
Expansion Slots |
PCI-Express | - 2 (x8) PCI-e slots
- 1x (x4) PCI-e (using x8) slot
|
PCI | 3x 32-bit PCI slots |
|
System BIOS |
BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0/3.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.5
|
|
Management |
Software | - Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal/External modem remote ring-on
|
|
PC Health Monitoring |
Voltage | - Monitors for CPU cores,+1.8 V, +3.3 V, +5 V, ±12 V, +3.3 V Stdby, +5 Stdby, VBAT, HT, Memory, chipset
- CPU core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN | - Total of six 4-pin fans
- 6x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x Fan Connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
- Chipkill Support
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 6/6, Pb Free |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
|
OS compatibility |
Please see our OS Compatibility Chart |