| |
Product SKUs |
| MBD-X7DB8-O | X7DB8 (Standard Retail Pack) |
| MBD-X7DB8-B | X7DB8 (Bulk Pack) |
| |
Physical Stats |
| Form Factor | Extended ATX |
| Dimensions | 12" x 13.05" (30.5cm x 33.2cm) |
| |
Processor/Cache |
| CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Quad-Core Intel XeonProcessor 5400/5300 sequence
- (Harpertown/Clovertown processor) up to 3.16 GHz
- Dual-Core Intel Xeon processor 5200/5100/5000 sequence (Wolfdale)
- (Woodcrest/Dempsey processor) up to 3.40 GHz
- NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon 5100 (Woodcrest) processors
|
| System Bus | 1333 / 1066 / 667 MHz system bus |
| Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
| |
System Memory |
| Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533 MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
| Memory Type | 667 / 533 MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 512 MB, 1GB, 2GB, 4GB |
| Memory Voltage | |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel 5000P (Blackford) chipset
- MCH + PXH + ESB2
|
| SCSI | - Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
- Host RAID 0, 1, & 10 support
|
| RAID | - Support for Zero-Channel RAID
- Optional: (card not included)
- RAID 0, 1, 5, 10
|
| SATA | - Intel ESB2 SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMLP)
- (Optional: AOC-SIMLP-B(+))
- (Optional: AOC-SIMLP-3(+)) with 3rd LAN support
|
| Network Controllers | - Intel (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT support for fast, scaleable, and reliable networking
|
| Graphics | ATI ES1000 controller with 16 MB of video memory |
| Super I/O | Winbond 83627HG chip |
| |
Input / Output |
| Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
| IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy | 1x Floppy controller; 1.44 MB, 2.88 MB |
| LAN | 2x RJ45 LAN ports |
| USB | - 2x USB rear ports
- 3x USB internal headers
- Total 5x USB 2.0 Compliant / 1.1 Compliant
|
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header
|
| Parallel Port | 1x ECP / EEP parallel port |
| |
Chassis ( Optimized for X7DB8 ) |
| 2U Chassis | - CSE-825S2-R700LPV
- CSE-825S2-560LPV
- CSE-825S2-560RCV
- CSE-823S-550LP
|
| 3U Chassis | - CSE-836S2-R800V
- CSE-833S2-R760
- CSE-833S-R760
- CSE-833S2-550
- CSE-833S-550
- CSE-933S1-R760
- CSE-933S2-R760
|
| Tower / 4 U Rackmount | - CSE-745S2-R800
- CSE-745S2-800
- CSE-743S2-R760
- CSE-743S1-R760
- CSE-743S2-650
- CSE-743S1-650
- CSE-743S1-645 (FAN-0091 Required)
|
| Important Chassis Notes | - To ensure system stability, a 500W (minimum) ATX power supply
- [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
| |
Expansion Slots |
| PCI-Express | - 2 (x8) PCI-e slots
- 1x (x4) PCI-e (using x8) slot
- 1 SEPC (Supermicro PCI-e Power Connector) slot for 2U active riser cards with a power extension (i.e. CSE-RR2UE-AX)
|
| PCI-X | - 2x 64-bit 133MHz PCI-X (3.3V) slots
- 1x 64-bit 100MHz PCI-X (3.3V) slot
|
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Hardware BIOS Virus protection
|
| |
Management |
| Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU Cores, +3.3V, +5V, +5V Standby, & ±12V
- 5-Phase-switching voltage regulator with auto-sense from 0.8375 V - 1.60 V
|
| FAN | - Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
|
| LED | CPU / System Overheat LED |
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 5/6, Server Exemption |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
| |
OS compatibility |
| Please see our OS Compatibility Chart |
0 Artikel
