| |
Product SKUs |
| MBD-X6DHi-G2-O | X6DHi-G2 (Standard Retail Pack) |
| MBD-X6DHi-G2-B | X6DHi-G2 (Bulk Pack) |
| |
Physical Stats |
| Form Factor | Extended ATX |
| Dimensions | 12" x 13.05" (30.5cm x 33.2cm) |
| |
Processor/Cache |
| CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Xeon Dual Core (Paxville) CPU with 2x 2 MB L2 Integrated Advanced Transfer Cache
- Xeon (Nocona) CPU with 1 MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2 MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
| System Bus | 800 MHz system bus |
| Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
| |
System Memory |
| Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400 MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
|
| Memory Type | DDR2 400 MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB |
| Memory Voltage | 1.8 V only |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel E7520 chipset
- MCH + 6300ESB + PXH/V + 82541PI
|
| SATA | 6300ESB 2-port SATA Controller |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- (Optional: AOC-IPMI20-E)
|
| Network Controllers | Dual Intel 82541PI Single-Port Gigabit Controller |
| Graphics | ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| |
Chassis ( Optimized for X6DHi-G2 ) |
| 2U | - SC823i-R500LP
- SC823i-500RC
|
| 4U / Tower | - SC743i-R760
- SC743i-650
- SC742T-550
|
| Important Chassis Notes | - To ensure system stability with non-Paxville CPUs, a 420W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
- To ensure system stability with Paxville Dual Core CPUs, a 500W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
- Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
|
| |
Expansion Slots |
| PCI-Express | 2 (x8) PCI-e slots |
| PCI-X | - 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
|
| PCI | 1x PCI slot |
| |
Input / Output |
| Serial ATA | Two SATA connectors support 2 SATA drives |
| IDE | - Dual EIDE channels support up to four UDMA / IDE devices
- Supports ATA/100
|
| Floppy | 1x Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
| LAN | 2x RJ45 LAN ports |
| USB | - 2x USB rear ports
- 2x USB internal headers
- USB 2.0 compliant / 1.1 compatible
|
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial ports
- 1x Header
|
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
|
| |
Management |
| Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0 / 1.5
- SuperDoctor® III
- Watch Dog
|
| Power Configurations | - ACPI/APM Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
|
| |
PC Health Monitoring |
| Voltage | Monitors for CPU Cores, CPU0, CPU1, +3.3V, +5V, ±12V |
| FAN | - Total of four 4-pin fan headers and four 3-pin fan headers
- 8x fans with tachometer status monitoring
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
0 Artikel
