| |
Product SKUs |
| MBD-X6DHE-G2+-O | X6DHE-G2+ (Standard Retail Pack) |
| MBD-X6DHE-G2+-B | X6DHE-G2+ (Bulk Pack) |
| |
Physical Stats |
| Form Factor | Extended ATX |
| Dimensions | 12" x 13.05" (30.5cm x 33.2cm) |
| |
Processor/Cache |
| CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Xeon (Paxville) Dual Core CPU with 2x 2 MB L2 Integrated Advanced Transfer Cache
- Xeon (Nocona) CPU with 1 MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2 MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
| System Bus | 800 MHz system bus |
| Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
- OS compatibility chart
|
| |
System Memory |
| Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400 MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
|
| Memory Type | DDR2 400 MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1GB, 2 GB |
| Memory Voltage | 1.8 V only |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel E7520 chipset
- MCH + ICH5R + PXH +82546GB
|
| SATA | - ICH5R SATA Controller
- RAID 0, 1, JBOD support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- (Optional: AOC-IPMI20-E)
|
| Network Controllers | - Intel 82546GB dual-port Gigabit controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| Graphics | ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
| Super I/O | National 87427 chip |
| |
Input / Output |
| Serial ATA | - Two Serial ATA ports
- Two SATA hard drives supported
|
| IDE | - Dual EIDE channels support up to four UDMA / IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy | 1x Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
| LAN | 2x RJ45 LAN ports |
| USB | - 2x USB rear ports
- 3x USB internal headers
- USB 2.0 compliant / 1.1 compatible
|
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header
|
| Parallel Port | 1x ECP / EEP parallel port |
| |
Chassis ( Optimized for X6DHE-G2+ ) |
| 2U Chassis | - SC823i-550LP
- SC823i-R500RC
|
| Tower / 4 U Rackmount | |
| Important Chassis Notes | - To ensure system stability with non-Paxville CPUs, a 420W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
- To ensure system stability with Paxville Dual Core CPUs, a 500W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
- Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
|
| |
Expansion Slots |
| PCI-Express | - 2 (x8) PCI-e slots
- 1x (x4) PCI-e slot
|
| PCI-X | - 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
|
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- PCI 2.2
- PCI-X 1.0
- Fan Speed Control
|
| |
Management |
| Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU cores, +3.3 V, +5 V, ±12 V & +3.3 V Standby
- CPU core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6V
|
| FAN | - Total of four 4-pin and four 3-pin fan headers
- 8x fans with status monitoring
- Status Monitor with firmware/software on/off control
- Low noise fan speed control
- 4x Pulse Width Modulated (PWM) fan connector
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
|
| LED | - CPU Overheat LED
- System Overheat LED
- Supsend-State Indicator LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC
|
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
| |
OS compatibility |
| Please see our OS Compatibility Chart |
0 Artikel
