|
Product SKUs |
MBD-X10DRL-i -O | X10DRL-i (Standard Retail Pack) |
MBD-X10DRL-i -B | X10DRL-i (Bulk Pack) |
|
Physical Stats |
Form Factor | ATX |
Dimensions | 12" x 10" (30.48cm x 25.4cm) |
|
Processor/Cache |
CPU | - Intel® Xeon® processor E5-2600 v3 family
- (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
|
Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
System Bus | QPI up to 9.6 GT/s |
Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
|
System Memory |
Memory Capacity | - 8x 288-pin DDR4 DIMM sockets
- Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
|
Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
|
Memory Voltage | 1.2 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
Chipset | Intel® C612 Express chipset |
SATA | - I-SATA 4 and I-SATA 5 support SATA DOM
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
Network Controllers | - Intel® i210 Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
Video | ASPEED AST2400 BMC |
|
Input / Output |
SATA | 10x SATA3 (6Gbps) ports |
LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | - 4x USB 3.0 ports (2 rear + 2 via header)
- 5x USB 2.0 ports (2 rear + 2 via header + 1 Type A)
|
Video | 1x VGA port |
Serial Port / Header | 2x Fast UART 16550 port / 1 Header |
DOM | DOM (Disk on Module) power connector |
TPM | 1x TPM 1.2 20-pin Header |
|
Chassis (Optimized for X10DRL-i ) |
1U Chassis: | - SC113MFAC2-R606CB
- SC813MFTQ-441CB
- SC813MFTQ-R400CB
- SC813MFTQ-R606CB
|
2U Chassis: | - SC213LT-600LPB
- SC823TQ-653LPB
- SC826TQ-R500LPB
|
3U / Mid-Tower Chassis: | - SC732D4F-903B
- SC732I-500B
- SC833T-653B
|
4U / Tower Chassis: | |
Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis are recommended. |
|
SuperServer(s) with X10DRL-i |
Model(s) | - SYS-6018R-MT
- SYS-6018R-MTR
|
|
Expansion Slots |
PCI-Express | - 3 PCI-E 3.0 x8
- 1 PCI-E 3.0 x16
- 1 PCI-E 3.0 x4 (in x8)
- 1x PCI-E 2.0 x4 (in x8)
|
|
System BIOS |
BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
|
Management |
Software | - SuperDoctor® 5
- Intel® Node Manager 3.0
- Watch Dog
- IPMI 2.0
|
Power Configurations | - ACPI Power Management
- Power-on mode for AC power recovery
|
|
PC Health Monitoring |
Voltage | - Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages.
- 5 Phase-switching voltage regulator
|
FAN | - 8x 4-pin fan headers (up to 8 fans)
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- UID/Remote UID
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
- RoHS, Halogen Free
- Dual Cooling Zones
|
|
Operating Environment |
Operating Temperature Range | 10°C - 35°C (50°F - 95°F) |
Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
Operating Relative Humidity Range | 8% - 90% (non-condensing) |
Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |