| |
Product SKUs |
| MBD-X10DAC -B | X10DAC (Bulk Pack) |
| MBD-X10DAC -O | X10DAC (Retail Pack) |
| |
Physical Stats |
| Form Factor | E-ATX |
| Dimensions | 12" x 13" (30.5cm x 33.0cm) |
| |
Processor/Cache |
| CPU | - Intel® Xeon® processor E5-2600 v3 family
- (up to 160W TDP **)
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
| |
System Memory |
| Memory Capacity | - 16x 288-pin DDR4 DIMM sockets
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
|
| Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
|
| Memory Voltage | 1.2 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel® C612 Express chipset |
| SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| SAS | LSI 3008 SAS3 (12Gbps) controller; SW RAID 0, 1, 10 |
| Network Controllers | - Intel® i210 Dual Port Gigabit Ethernet
- Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio | RealTek ALC888 7.1 High Definition Audio with S/PDIF header |
| |
Input / Output |
| SATA | 10x SATA3 (6Gbps) ports |
| SAS | 8x SAS-3 (12 Gb/s) ports |
| LAN | 2x RJ45 Gigabit Ethernet LAN ports |
| USB | - 6x USB 3.0 ports (4 rear + 2 via header)
- 5x USB 2.0 ports (2 rear + 2 via header + 1 Type A)
|
| Audio | 7.1 HD Audio with optical S/PDIF |
| Serial Port / Header | 2x COM Ports (1 rear, 1 header) |
| DOM | 2x SuperDOM (Disk on Module) ports |
| TPM | 1x TPM 1.2 20-pin Header |
| |
Chassis (Optimized for X10DAC ) |
| 2U Chassis | - CSE-213A-R740LPB
- CSE-216BAC-R920LPB
- CSE-216BE1C-R920LPB
- CSE-825TQ-R740LPB
- CSE-826BA-R920LPB
|
| 3U Chassis | - CSE-835BTQ-R1K28B
- CSE-835TQ-R920B
- CSE-836BA-R1K28B
- CSE-836BA-R920B
|
| Mid-Tower | - CSE-732D4F-903B
- CSE-732i-865B
|
| Tower / 4 U Rackmount | - CSE-743TQ-1200B
- CSE-745BTQ-R1K28B-SQ
- CSE-745TQ-R920B
- CSE-747BTQ-R1K62B
- CSE-747TG-R1400B-SQ
- CSE-846BA-R920B
|
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis are recommended. |
| |
Expansion Slots |
| PCI-Express | - 3 PCI-E 3.0 x16
- 2 PCI-E 3.0 x8
- 1x PCI-E 2.0 x4 (in x8)
|
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
Management |
| Software | - NMI
- SuperDoctor® 5
- Watch Dog
|
| Power Configurations | - ACPI Power Management
- Power-on mode for AC power recovery
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
| FAN | - 8x 4-pin fan headers (up to 8 fans)
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- UID/Remote UID
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
| |
Operating Environment |
| Operating Temperature Range | 10°C - 35°C (50°F - 95°F) |
| Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range | 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |
0 Artikel
