| |
Product SKUs |
| SYS-6027PR-HTTR | SuperServer 6027PR-HTTR (Black) |
| |
Motherboard |
| Super X9DRT-PT |
| |
Processor/Cache |
| CPU | - Dual Socket R (LGA 2011)
- Intel Xeon processor E5-2600 (up to 135 W TDP *)
- * Please contact your Supermicro sales representative for additional details
|
| Note | BIOS version 3.0 or above is required |
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory (per Node) |
| Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Supports up to 1 TB DDR3 ECC LRDIMM
- Supports up to 512 GB DDR3 ECC registered memory (RDIMM)
|
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V and 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602 chipset |
| SATA | - SATA-3 (6 Gb/s) w/ RAID 0, 1, 10
- SATA2 (3Gbps) w/ RAID 0, 1, 10
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers | - Intel X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics | Matrox G200eW |
| |
Input / Output (per Node) |
| SATA | - 2x SATA-3 (6 Gb/s) ports
- 4x SATA2 (3Gbps) ports
|
| LAN | - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 2x USB 2.0 ports total (2x rear) |
| VGA | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port / 1 Header |
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-827HQ+-R2K02B |
| |
Dimensions |
| Width | 17.25" (438mm) |
| Height | 3.47" (88mm) |
| Depth | 30" (762 mm) |
| Gross Weight | 85 lbs (38.6kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
- UID button
|
| LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| |
Expansion Slots (per Node) |
| PCI-Express | 1x PCI-E 3.0 x16 Low-Profile slot |
| |
Drive Bays (per Node) |
| Hot-Swap | 3x 3.5" Hot-swap SAS/SATA HDD trays |
| |
System Cooling |
| Fans | 4x 8 cm heavy duty PWM fans with optimal fan speed control |
| |
Switching Power Supply |
| 2000W Redundant Power Supplies with I²C & PMBus |
| AC Input | - 1100W Output @ 100-120V, 12.7-10.5A, 50-60Hz
- 1400W Output @ 120-140V, 13.5-11.5A, 50-60Hz
- 1800W Output @ 200-220V, 10.0-9.5A, 50-60Hz
- 1980W Output @ 220-230V, 10.0-9.8A, 50-60Hz
- 2000W Output @ 230-240V, 10.0-9.8A, 50-60Hz
|
| 5Vsb | 4A |
| I³C Remote Monitoring | FRU Data / SMBus / PMBus |
| Certification | Platinum Certified (Cert. in progress) |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
