| |
Product SKUs |
| SYS-1015B-M3B | SuperServer 1015B-M3B (Black) |
| |
Motherboard |
| Super X7SB3-F |
| |
Processor/Cache |
| CPU | - Single LGA775 ZIF Socket
- Supports Quad-Core Intel Xeon X3300/X3200 series
- Supports Dual-Core Intel Xeon E3100/3000 series
- Supports Intel Xeon processor L3360 and L3110 series
- Supports Intel Core 2 Quad Q9000/Q8000/Q6000 series
- Supports Intel Core 2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel Pentium E5000/E2000 series
- Supports Intel Celeron E1000 and 400 series
- NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.
|
| System Bus | 1333 / 1066 / 800 MHz system bus |
| |
System Memory |
| Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Dual Channel)
|
| Memory Type | DDR2 800/667 MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB |
| Memory Voltage | 1.8 V only |
| |
On-Board Devices |
| Chipset | - Intel 3210 chipset
- ICH9 +2x Intel 82574L + LSI 1068E
|
| SAS | - LSI SAS1068E
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
|
| Serial ATA | Intel® ICH9 SATA2 (3 Gbps) controller built-in |
| IPMI | - On-board IPMI with Dedicated LAN
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond WCPM450
|
| Network Controllers | - 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel 82574L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
| VGA | On-board Winbond integrated Graphics |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | CK505 |
| |
Input / Output |
| SAS | 8x SAS / SATA ports |
| Serial ATA | - Two Serial ATA ports (3 Gb/s performance)
- Two SATA hard drives supported
|
| Floppy | 1x Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | - Up to 8x USB 2.0 / 1.1 compliant ports
- 2x rear ports
- 2x internal headers + 2x on-board
|
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x internal header
|
| |
System BIOS |
| BIOS Type | 16Mb Flash EEPROM with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0/2.0
- SMBIOS 2.3
- USB Keyboard support
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-113MTQ-560CB |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 20" (508 mm) |
| Gross Weight | 10 lbs (4.5 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
|
| |
Expansion Slots |
| PCI-Express | 1x (x8) PCI-e slot |
| |
Drive Bays |
| Hot-Swap | 8x 2.5" Hot-swap SAS / SATA drive bays |
| |
SAS / SATA Backplane |
| 1x SAS / SATA Backplane |
| |
System Cooling |
| Fans | - 4x 40x28 mm high-efficiency fans
- 6x fans maximum
|
| |
Power Supply |
| 560 W AC to DC power supply w/ PFC |
| AC Voltage | 100-240 V, 50-60 Hz, 6.5-2.6 A |
| +5 V | 15 A |
| +5 V standby | 2 A |
| +12 V | 46.5 A |
| -12 V | 0.5 A |
| +3.3 V | 15 A |
| Certification | Silver Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores ( +1.8V, +3.3V, +5, 12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
- CPU core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
- Adjustable CPU clock frequency ratio
|
| FAN | - Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status Monitor with firmware / software speed control
- Status monitor for on/off control
- Supports 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
- PECI
|
| LED | - CPU / System Overheat LED
- +5 V Standby alert LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Artikel
