|
Product SKUs |
SYS-1015B-3B | SuperServer 1015B-3B (Black) |
|
Motherboard |
Super X7SB3-F |
|
Processor/Cache |
CPU | - Single LGA775 ZIF Socket
- Supports Quad-Core Intel Xeon X3300/X3200 series
- Supports Dual-Core Intel Xeon E3100/3000 series
- Supports Intel Xeon processor L3360 and L3110 series
- Supports Intel Core 2 Quad Q9000/Q8000/Q6000 series
- Supports Intel Core 2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel Pentium E5000/E2000 series
- Supports Intel Celeron E1000 and 400 series
- NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.
|
System Bus | 1333 / 1066 / 800 MHz system bus |
|
System Memory |
Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Dual Channel)
|
Memory Type | DDR2 800/667 MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB |
Memory Voltage | 1.8 V only |
|
On-Board Devices |
Chipset | - Intel 3210 chipset
- ICH9 +2x Intel 82574L + LSI 1068E
|
SAS | - LSI SAS1068E
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
|
Serial ATA | Intel® ICH9 SATA2 (3 Gbps) controller built-in |
IPMI | - On-board IPMI with Dedicated LAN
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond WCPM450
|
Network Controllers | - 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel 82574L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
VGA | On-board Winbond integrated Graphics |
Super I/O | Winbond 83627DHG chip |
Clock Generator | CK505 |
|
Input / Output |
SAS | 8x SAS / SATA ports |
Serial ATA | - Two Serial ATA ports (3 Gb/s performance)
- Two SATA hard drives supported
|
Floppy | 1x Floppy controller; 1.44 MB |
LAN | 2x RJ45 LAN ports |
USB | - Up to 8x USB 2.0 / 1.1 compliant ports
- 2x rear ports
- 2x internal headers + 2x on-board
|
VGA | 1x VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | - 1x Fast UART 16550 serial port
- 1x internal header
|
|
System BIOS |
BIOS Type | 16Mb Flash EEPROM with Phoenix BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0/2.0
- SMBIOS 2.3
- USB Keyboard support
|
|
Chassis |
Form Factor | 1U Rackmount |
Model | CSE-111T-560CB |
|
Dimensions |
Height | 1.7" (43 mm) |
Width | 16.8" (426 mm) |
Depth | 21.95" (558 mm) |
Gross Weight | 35 lbs (15.9 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
|
|
Expansion Slots |
PCI-Express | 1x (x8) PCI-e slot |
|
Drive Bays |
Hot-Swap | 4x 2.5" Hot-swap SAS / SATA drive bays |
|
SAS / SATA Backplane |
1x SAS / SATA Backplane |
|
System Cooling |
Fans | - 3x 40x56mm Counter Rotating Fans
- 2x 40x28mm fans for add-on card (optional)
|
|
Power Supply |
560 W AC to DC power supply w/ PFC |
AC Voltage | 100-240 V, 50-60 Hz, 6.5-2.6 A |
+5 V | 15 A |
+5 V standby | 2 A |
+12 V | 46.5 A |
-12 V | 0.5 A |
+3.3 V | 15 A |
Certification | Silver Certified |
|
PC Health Monitoring |
CPU | - Monitors for CPU Cores ( +1.8V, +3.3V, +5, 12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
- CPU core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
- Adjustable CPU clock frequency ratio
|
FAN | - Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status Monitor with firmware / software speed control
- Status monitor for on/off control
- Supports 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
- PECI
|
LED | - CPU / System Overheat LED
- +5 V Standby alert LED
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 6/6, Pb Free |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|