| |
Product SKUs |
| SuperWorkstation | SYS-5046A-XB (Black) |
| |
Motherboard |
| Super C7X58 |
| |
Processor/Cache |
| CPU | - LGA 1366 Socket
- Intel Core i7-990X, i7-980X, i7-975 and i7-965 Extreme Edition
- Intel Core i7 series
- Intel Xeon 5600/5500 series
- Intel Xeon 3600/3500 series
|
| System Bus | QPI (up to 6.4 GT/s) |
| |
System Memory |
| Memory Capacity | - Supports up to 24 GB 1600 / 1333 / 1066 / 800 MHz DDR3 ECC / non-ECC unbuffered memory
- Three Channel memory bus
- 6 DIMM sockets
|
| Memory Type | 1600 / 1333 / 1066 / 800MHz unbuffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB |
| Memory Voltage | 1.5 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel X58 Express chipset
- ICH10R
|
| SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support
|
| Audio | Realtek ALC883 7.1 HD audio |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | CK505 |
| |
Expansion Slots |
| PCI-Express | - 2x (x16) PCI-e 2.0 slots
- 1x (x4) PCI-e slot (using x8 slot)
|
| PCI | 1x 32-bit PCI slot |
| |
Input / Output |
| Serial ATA | - 6 Serial ATA ports
- 6 SATA hard drives supported
|
| Floppy | 1x Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | - 8x USB rear ports
- 2x USB on-board
- 1x USB internal header (2 ports)
- Total 12x USB 2.0 Compliant
|
| Audio | - 6x analog outputs
- 1x S/PDIF digital output
|
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 2 Fast UART 16550 serial header |
| IEEE 1394a | - 2x headers
- 1x external connector
|
| |
I/O Panel |
| Please see this board's I/O Panel |
| |
System BIOS |
| BIOS Type | 4 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
|
| Model | SC743TQ-865-SQ |
| |
Dimensions |
| Height | 7.0" (178 mm) |
| Width | 17.2" (437mm) |
| Depth | 25.5" (648 mm) |
| Gross Weight | 63 lbs (28.6kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Failure LED
|
| Ports | 2x USB Ports |
| |
Drive Bays |
| Hot-Swap | - 6x SATA Hot-swap Drives
- 2x Spare Trays
|
| Peripheral Bay(s) | - 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
| |
SATA Backplane |
| SC743 SATA Backplane w/ Enclosure Management |
| |
System Cooling |
| Fans | - 2x 8cm Hot-Swap PWM Cooling Fans
- 1x 9cm Hot-Swap Rear Exhaust PWM Fan
- 1x Active heatsink w/ heatpipe
|
| |
Power Supply |
| 865 W AC power supply (cooling-redundant) w/ PFC |
| AC Voltage | 100 - 240 V, 50-60 Hz, 12-6 A |
| +5 V standby | 6.5 A |
| +12 V | 70 A |
| +5 V | 30 A |
| +3.3 V | 30 A |
| -12 V | 1 A |
| Certification | Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, 12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375 V-1.60 V
|
| FAN | - Total of six fan headers supporting up to 6 fans
- Six 4-pin fan headers
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- +5 V Standby alert LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Artikel
