| |
Product SKUs |
| SYS-5035G-T | SuperServer 5035G-T (Beige) |
| SYS-5035G-TB | SuperServer 5035G-TB (Black) |
| |
Motherboard |
| Super PDSGE |
| |
Processor/Cache |
| CPU | - Single LGA775 ZIF Socket
- Supports an Intel Pentium D (Dual Core) processor
- Supports an Intel Pentium Extreme Edition processor
- Supports an Intel Pentium 4 processor
- Supports an Intel Pentium 4 Extreme Edition processor
- Supports an Intel Celeron D processor
- Hyper-Threading (HT) capable
|
| System Bus | 1066 / 800 / 533 MHz system bus |
| |
System Memory |
| Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, ECC DDR2 667/533/400 MHz memory (Single / Dual Channel)
|
| Memory Type | DDR2 667/533/400 MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
| Memory Voltage | 1.8 V only |
| |
On-Board Devices |
| Chipset | - Intel 955X (Glenwood)
- ICH7R + PXH-V + Intel 82573V
|
| Serial ATA | - Intel ICH7R SATA (3 Gb/s) controller built-in
- Host RAID 0, 1, 5, and 10 Support
|
| Network Controllers | - Single-port Intel 82573V Gigabit PCI-Express Ethernet (Tekoa)
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
|
| Audio | AC'97 audio CODEC with high quality 6-channel sound |
| Super I/O | Winbond 83627EHF chip |
| |
Expansion Slots |
| PCI-Express | |
| PCI-X | 2x 64-bit 133MHz PCI-X (3.3V) slot |
| PCI | 3x 32-bit 33MHz PCI (5V) slot |
| |
Input / Output |
| Serial ATA | - Four Serial ATA ports (3 Gb/s performance)
- Four SATA hard drives supported
|
| IDE | - One EIDE channel supports up to two UDMA/IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy | 1x Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
| LAN | 1x RJ45 LAN port |
| USB | - 8x USB 2.0 compliant / 1.1 compatible (6x ports + 2x headers)
- 2 in front (FUCI), 6 in rear
|
| Audio | - 1x Line In / Line Out / Microphone port
- Front Panel Header
|
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x Serial Header
|
| Parallel Port | 1x ECP/EEP Parallel Port |
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with AwardBIOS |
| BIOS Features | - User Over-Clock in System BIOS
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- BIOS rescue hot keys
- USB Keyboard support
|
| |
Chassis |
| Form Factor | Mid-Tower |
| |
Physical Features |
| Height | 16.8" (427mm) |
| Width | 7" (178 mm) |
| Depth | 20.9" (531mm) |
| Weight | 39 lbs (17.7 kg) |
| Available Colors | Beige, Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
| Ports | 2x Front side USB ports (USB 2.0 ready) |
| |
Drive Bays |
| Hot-Swap | 4x 3.5" Serial ATA hot-swap drive bays |
| Peripheral Bay | - 2x 5.25" peripheral drive bay
- 1x 3.5" bay for floppy drive
|
| |
Peripheral Drives |
| Floppy | TEAC 3.5" 1.44 MB Floppy Drive |
| |
System Cooling |
| Fans | - 1x 12cm rear exhaust fan
- 1x 9cm mounted thermal cooling fan
- 2x 8cm fans (450W power supply configuration)
|
| |
SATA Backplane |
| 4 x 3.5" SATA Backplane |
| |
Power Supply |
| 450W low-noise AC power supply with redundant cooling feature (with PFC) |
| AC Voltage | 100 - 240 V, 50/60 Hz, 10 A |
| DC Output | - 5V + 3.3V ? 160W
- 12V1 + 12V2 + 12V3 ? 34 Amp
|
| +5 V | 26 A |
| +5 V standby | 2 A |
| +12 V1 | 15 A |
| +12V2 | 15 A |
| +12V3 | 18 A |
| -12 V | 1 A |
| +3.3 V | 30 A |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +1.5V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT
- CPU core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio settings (via BIOS)
|
| FAN | - Total of five 4-pin fan headers
- 5x fans with tachometer monitoring
- Status Monitor with firmware / software speed control
- Support 4-pin PWM fan (with speed control)
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
|
| LED | - CPU / System Overheat LED
- +5 V standby alert LED
- Supsend-State Indicator LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- Lead Free (not 100%)
|
0 Artikel
