| |
Product SKUs |
| SSG-5028R-E1CR12L | SuperServer 5028R-E1CR12L (Black) |
| |
Motherboard |
| Super X10SRH-CLN4F |
| |
Processor |
| CPU | - Intel® Xeon® processor E5-2600/1600 v3 family (up to 145W TDP **)
- Single Socket R3 (LGA 2011)
|
| Core / Cache | Up to 18 Cores / Up to 45MB Cache |
| Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support |
| |
System Memory |
| Memory Capacity | - 8x 288-pin DDR4 DIMM sockets
- Up to 512GB DDR4 ECC LRDIMM
- Up to 256GB DDR4 ECC RDIMM
|
| Memory Type | 2133/1866/1600/1333MHz ECC DDR4 SDRAM 72-bit, 284-pin gold-plated DIMMs |
| DIMM Sizes | RDIMM: 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | 1.2 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C612 Express chipset |
| SAS | - SAS3 (12Gbps) via LSI 3008 (IR mode)
- SW RAID 0, 1, 10
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel® i350-AM4 Quad Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics | ASPEED AST2400 BMC |
| |
Input / Output |
| SAS | 8x SAS-3 (12 Gb/s) ports |
| SATA | 10x SATA3 (6Gbps) ports |
| LAN | - 4x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 2x USB 3.0 ports (rear)
- 2x USB 2.0 ports (rear)
|
| VGA | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port / 1 Header |
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-826BE1C-R920LPB |
| |
Dimensions |
| Width | 17.2" (437mm) |
| Height | 3.5" (89mm) |
| Depth | 25.6" (648mm) |
| Weight | - Gross Weight: 58 lbs (26.3 kg)
- Net Weight: 34 lbs (15.4 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| |
Expansion Slots |
| PCI-Express | - 1x PCI-E 3.0 x4 (in x8) slot
- 1x PCI-E 3.0 x8 (in x16) slot
- 2x PCI-E 3.0 x8 slots
- 1x PCI-E 2.0 x2 (in x4) slot
- 1x PCI-E 2.0 x4 (in x8) slot
|
| |
Drive Bays |
| Hot-Swap | 12x 3.5" Hot-swap SAS3 HDD bays |
| Optional | 2x 2.5" Hot-swap HDD bays (rear) |
| |
Backplane |
| SAS3 Backplane: SAS3 12Gbps single expander backplane, w/ LSISAS3x28 expander, support 12x 3.5" drives, with 4x mini-SAS HD connectors, 2 for uplink and another 2 for downlink |
| |
System Cooling |
| Fans | 3x 8cm 9.5K RPM, 4-pin PWM fans |
| |
Power Supply with Power Distributor |
| 920 W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I²C |
| AC Input | 100-240 V, 50-60 Hz, 11-4.5 A |
| DC Output | - 4 A @ +5 V Standby
- 75 A @ +12 V
|
| Certification | Platinum Certified |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
