| |
Product SKUs |
| SSG-5018A-AR12L | SuperServer 5018A-AR12L |
| |
Motherboard |
| Super A1SA7-2750F |
| |
Processor/Cache |
| CPU | - Intel Atom processor C2750
- CPU TDP 20W (8-Core)
- FCBGA 1283
- System-on-Chip
|
| |
System Memory |
| Memory Capacity | - 4x 240-pin DDR3 DIMM sockets
- Supports up to 64 GB DDR3 ECC or non-ECC UDIMM memory
|
| Memory Type | 1600/1333MHz ECC DDR3 SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 16GB, 8GB, 4GB, 2GB |
| Memory Voltage | 1.5 V, 1.35 V |
| |
On-Board Devices |
| Chipset | Socket on Chip |
| SAS/SATA | - SoC controller for 1 SATA- (6 Gb/s) port
- LSI 2116 SW controller for 16 SATA-3 ports, SATA-3 or SAS-2 with IT mode
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers | - Dual LAN w/ SoC, i354 built in LAN GbE MACs
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
| VGA | ASPEED AST2400 BMC |
| |
Input / Output |
| LAN | - 2x RJ45 GbE LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 3x USB 2.0 ports (2 rear, 1 Type A) |
| DOM | 1x SATA DOM (Disk on Module) power connector for OS drive |
| VGA | 1x VGA port |
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-801LTQ-R406B |
| |
Dimensions and Weight |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 32" (813mm) |
| Gross Weight | 38 lbs (16.5kg) |
| |
Front Panel |
| Buttons | Power On/Off button |
| LEDs | Network activity LEDs |
| |
Expansion Slots |
| PCI-Express | 1x PCI-E 2.0 x4 (in x8, Low-Profile, Half-height) slot |
| |
Drive Bays |
| Internal | 12x 3.5" Hot-swap HDD bays |
| |
Backplane |
| SAS/SATA HDD Backplane |
| |
System Cooling |
| Fans | 6x 40 x 28 mm PWM cooling fans |
| |
Power Supply |
| 400 W (1+1) Redundant SuperCompact Short-depth AC-DC Gold Level power supply with PMBus and I²C |
| AC Input | 400 W: 100-240 V, 50-60 Hz, 6-3 A |
| DC Output +5 V standby | 3 A |
| DC Output +12 V | 33 A |
| With Power Distributor | - +5 V: 25 A
- +3.3 V: 25 A
- -12V: 0.6 A
|
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
