|
Product SKUs |
SSG-2027R-AR24NV | SuperServer 2027R-AR24NV (Black) |
|
Motherboard |
Super X9DRH-iF-NV |
|
Processor/Cache |
CPU | - Dual Socket R (LGA 2011)
- Intel Xeon processor E5-2600 and E5-2600 v2 family
- (up to 130 W TDP)
|
Note | BIOS version 3.0 or above is required |
Cache | Up to 30 MB |
System Bus | QPI up to 8 GT/s |
|
System Memory |
Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Up to 1 TB DDR3 ECC LRDIMM
- Up to 512 GB DDR3 ECC registered memory (RDIMM)
- Up to 128 GB DDR3 ECC unbuffered memory (UDIMM)
|
Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Supports ECC and non-ECC UDIMMs
- Supports NV-DIMM Modules *
|
DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
Memory Voltage | 1.5 V, 1.35 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
Chipset | Intel C602 chipset |
AHCI SATA | - SATA2 (3Gbps) with RAID 0, 1, 5, 10
- SATA-3 (6 Gb/s) with RAID 0, 1
|
SCU SATA | SATA2 (3Gbps) with RAID 0, 1, 10 |
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers | - Intel i350 Dual Port GbE
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics | Matrox G200eW |
|
Input / Output |
AHCI SATA | - 2x SATA-3 (6 Gb/s) ports
- 4x SATA2 (3Gbps) ports
|
SCU SATA | 4x SATA2 (3Gbps) ports |
SAS | 24x SAS-3 (12 Gb/s) ports |
LAN | - 2x RJ45 GbE ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | 4x USB 2.0 ports total (4x rear) |
VGA | 1x VGA port |
Serial Port / Header | 2x Fast UART 16550 serial COM port(1 rear & 1 header) |
|
Chassis |
Form Factor | 2U Rackmount |
Model | CSE-216BAC-R920LPB |
|
Dimensions |
Width | 17.2" (437mm) |
Height | 3.5" (89mm) |
Depth | 25.5" (647.7mm) |
Gross Weight | 61 lbs (27.7 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
|
Expansion Slots |
PCI-Express | - 1x PCI-E 3.0 x16 slot
- 6x PCI-E 3.0 x8 slots (slots 1, 2, & 3 are populated by default)
|
|
Drive Bays |
Hot-Swap | 24x Hot-swap 2.5" SAS-3/SATA-3 HDD Bays |
|
Backplane |
SAS-3/SATA-3 Direct Attached Backplane |
|
System Cooling |
Fans | 3x 80 mm 7000 RPM PWM fans |
|
Power Supply with Power Distributor |
920 W high-efficiency AC-DC Redundant power supplies with PMBus and I²C |
AC Input | 100-240 V, 50-60 Hz, 11-4.5 A |
DC Output | - 4 A @ +5 V Standby
- 75 A @ +12 V
|
With Power Distributor | - +5V: 45 A
- +3.3V: 24 A
- -12V: 0.6 A
|
Certification | Platinum Certified |
|
System BIOS |
BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 60 °C (-40 °F to 140 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|