|
Product SKUs |
SYS-6027R-73DARF | SuperServer 6027R-73DARF (Black) |
|
Motherboard |
Super X9DRD-7LN4F |
|
Processor/Cache |
CPU | - Dual Socket R (LGA 2011)
- Intel Xeon processor E5-2600 and E5-2600 v2 family
- (60W - 135W TDP)
|
Note | BIOS version 3.0 or above is required |
Cache | Up to 30 MB |
System Bus | QPI up to 8 GT/s |
|
System Memory |
Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Up to 1 TB DDR3 ECC LRDIMM
- Up to 512 GB DDR3 ECC registered memory (RDIMM)
- Up to 128 GB DDR3 ECC unbuffered memory (UDIMM)
|
Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
Memory Voltage | 1.5 V, 1.35 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
Chipset | Intel C602J chipset |
SATA | - Via Cable for SATA controller
- SATA 2.0 (3 Gb/s) & 3.0 (6 Gb/s) with RAID 0, 1, 5, 10
|
SAS | - LSI 2308 SAS/SATA (6 Gb/s)
- RAID 0, 1, 10
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers | - Intel i350 Quad port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics | Matrox G200eW |
|
Input / Output |
Serial ATA | - 2x SATA 3.0 ports (6 Gb/s)
- 4x SATA 2.0 ports (3 Gb/s)
|
SAS | 8x SAS/SATA ports (6 Gb/s) |
LAN | - 4x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | 9x USB 2.0 ports total(4x rear + 4x via header + 1x Type A) |
VGA | 1x VGA port |
Serial Port / Header | 2x Fast UART 16550 ports (rear/header) |
|
Chassis |
Form Factor | 2U Rackmount |
Model | CSE-825TQ-R740LPB |
|
Dimensions |
Width | 17.2" (437mm) |
Height | 3.5" (89mm) |
Depth | 25.5" (648 mm) |
Gross Weight | 52 lbs (23.6 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
|
Expansion Slots |
PCI-Express | - 6x PCI-E 3.0 x8 slots
- (Both CPUs need to be installed for full access to PCI-E slots. See manual for details.)
|
|
Drive Bays |
Hot-Swap | 8x 3.5" Hot-swap SAS/SATA HDD trays |
|
Peripheral Drives |
DVD-ROM | Slim DVD-ROM drive (optional) |
|
Backplane |
1x 2U SAS/SATA backplane |
|
System Cooling |
Fans | 3x 8cm 7k RPM middle fans |
|
Power Supply with Power Distributor |
740 W (1+1) Redundant high-efficiency power supply with PMBus |
AC Input | 100-240 V, 50-60 Hz, 9-3.5 A |
DC Output | - 4 A @ +5 V Standby
- 61.7 A @ +12 V
|
With Power Distributor | - +5 V: 30 A
- +3.3V: 24 A
- -12V: 0.6 A
|
Certification | Platinum Certified |
|
System BIOS |
BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- 0 °C to 47 °C (32 °F to 116.6 °F)
- with certain configurations /
- workload environments
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|