| |
Product SKUs |
| SYS-8048B-C0R3FT | SuperServer 8048B-C0R3FT (Black) |
| |
Motherboard |
| Super X10QBL-CT |
| |
Processor/Cache |
| CPU | - Intel® Xeon® processor E7-8800 v4/v3*, E7-4800 v4/v3*
- family
- (up to 24 Cores and 165W TDP)
- Quad Socket R1 (LGA 2011)
|
| Cache | Up to 60 MB |
| System Bus | QPI up to 9.6 GT/s |
| Note: | E7-48XX/88XX v4/v3 family or above requires Rev. 2.0x or above motherboard w/ Jordan Creek II |
| |
System Memory |
| Memory Capacity | - 32x 240-pin DDR3 DIMM slots
- Supports up to 2TB DDR3, ECC Registered memory (RDIMM/LRDIMM) in 32 DIMM slots
|
| Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602J chipset |
| SAS | SAS2 (6Gbps) via LSI® 3008 controller |
| SATA | - SATA2 (3Gbps) with RAID 0, 1, 5, 10
- SATA-3 (6 Gb/s) with RAID 0, 1
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
| Graphics | ASPEED 2400 |
| |
Input / Output |
| SAS | 8x SAS-2 ports (6 Gb/s) |
| LAN | - 2x RJ45 10GBase-T ports
- 1x dedicated LAN port for IPMI on AOM
|
| USB | 3x USB 2.0 rear ports |
| Serial Port / Header | 2x Fast UART 16550 ports: 1 rear and 1 header |
| DOM | 2x DOM (Disk on Module) power connectors |
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
Chassis |
| Form Factor | 4U Rackmount/Tower |
| Model | CSE-748TQ-R1K43B |
| |
Dimensions and Weight |
| Height | 18.2" (462mm) |
| Width | 7.0" (178 mm) |
| Depth | 28.4" (721mm) |
| Weight | - Net Weight: 65.5 lbs (29.7 kg)
- Gross Weight: 86.0 lbs (39.0 kg)
|
| Available Colors | Black |
| |
Drive Bays |
| Hot-Swap | 5x 3.5" Hot-swap Drive Bays |
| |
Expansion Slots |
| PCI-Express | - 2x PCI-E 3.0 x16 Full-heigh slot
- 2x PCI-E 3.0 x8 Full-heigh slot
|
| |
Backplane |
| SAS/SATA HDD Backplane |
| |
System Cooling |
| Fans | - 3x 9cm Heavy Duty fans with speed controlCooling Fans
- 3x 8cm Heavy Duty fans with speed controlCooling Fans
|
| Shrouds | 1x Air Shroud (MCP-310-74806-0B) |
| |
Power Supply |
| Redundant 1400 W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 |
| AC Voltage | 100-240 V, 50-60 Hz, 15 A max. |
| +12 V | - 100 A / 115 V ac
- 117 A / 230 V ac
|
| With Power Distributor | - +5 V: 30 A
- +3.3 V: 25 A
- -12V: 0.6 A
|
| Certification | Platinum Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU cores, +1.2 V, 1.5 V, +3.3 V, +12 V, (+3 V, 1.0 V, 1.2 V, 1.8 V, 1.1 V) Standby, VBAT, Memory, chipset voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6 V-1.35 V
|
| FAN | - 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
|
| Temperature | - Monitoring for CPU and system environment
- Thermal Control for 9x fan connectors
|
| Other Features | Chassis intrusion detection |
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
