| |
Product SKUs |
| SYS-8045C-3RB | SuperServer 8045C-3RB (Black) |
| |
Motherboard |
| Super X7QC3 |
| |
Processor/Cache |
| CPU | - Quad 604-pin FC-PGA6 Sockets
- Supports up to four Intel 64-bit Xeon MP processor(s) of the same type below:
- 6-Core Intel Xeon Processor 7400 sequence
- Quad-Core Intel Xeon Processor 7300 sequence
- Dual-Core Intel Xeon processor 7200 sequence
|
| System Bus | 1066 MHz system bus |
| Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
| |
System Memory |
| Memory Capacity | - Twenty-four 240-pin DIMM sockets
- Supports up to 192 GB 667 / 533 MHz DDR2 ECC FB-DIMM memory
- Quad branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
| Memory Type | 667 / 533 MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel 7300 (Clarksboro) chipset
- ESB2
|
| SAS | - LSI 1068E Serial-Attached SCSI (SAS) Controller
- SAS Dual-Channel (internal)
- Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
- Host RAID 0, 1, & 10 support (optional RAID 5 w/ AOC-iButton68)
- SGPIO
|
| SATA | - Intel ESB2 SATA-2 controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMSO)
- (Optional: AOC-SIMSO(+))
- For dedicated LAN, cable CBL-0177L must be used (cable sold separately)
|
| Network Controllers | - Intel 82575EB Dual-Port Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT support for fast, scaleable, and reliable networking
|
| Graphics | ATI ES1000 controller with 32 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Clock Generator | CK410B chip |
| |
Input / Output |
| SAS | 8x SAS / SATA ports |
| Serial ATA | Six Serial ATA ports |
| IDE | - Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- Compact Flash (40-pin connector, IDE 1, single channel) slot
|
| LAN | 2x RJ45 LAN ports |
| USB | - 2x USB rear ports
- 3x USB internal header
- 5x total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Header
|
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | - Tower / 4U Rackmountable
- Optional Rackmount Kit (MCP-290-00001-00)
|
| Model | SC748TQ-R1200 |
| |
Dimensions |
| Height | 17.8" (452mm) |
| Width | 7.0" (178 mm) |
| Depth | 29.4" (746mm) |
| Gross Weight | 87 lbs (39.5kg) |
| Available Colors | Black, Beige |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Failure LED
- Power Fail LED
|
| Ports | 2x USB Ports |
| |
Drive Bays |
| Hot-Swap | - 5x 3.5" SAS / SATA Hard Drives
- Additional three 3.5" SAS/SATA Hard Drives available with optional M35 Mobile Rack
|
| Peripheral Bay(s) | 3x 5.25" Peripheral Drive Bays |
| |
Expansion Slots |
| PCI-Express | - 1x (x8) PCI-e (using x16) slot
- 1x (x8) PCI-e (using x8) slot
- 1x (x4) PCI-e (using x8) slot
|
| PCI-X | 1x 64-bit 133MHz PCI-X (3.3V) slots |
| |
SAS Backplane |
| SAS/SATA Hard Drive Backplane |
| |
System Cooling |
| Fans | - 3x 5000 RPM Hot-Swap Cooling Fans
- 3x 5000 RPM Hot-Swap Rear Exhaust Fan
|
| Shrouds | 1x Air Shroud |
| |
Power Supply |
| 1200 W (1 + 1) Redundant high-efficiency power supply w/ PFC |
| +5 V standby | 4 A |
| +12 V | 74 A |
| With Power Distributor | - +5 V: 20 A
- +3.3 V: 20 A
- -12V: 0.6 A
|
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores,+1.8V, +3.3V, +5V, 12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
- CPU core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN | - Total of nine 4-pin fans
- 9x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins (w/ speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 9x Fan Connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- Chipkill Support
|
| |
Operating Environment / Compliance |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Artikel
