|
Product SKUs |
SYS-6035B-8R | SuperServer 6035B-8R (Beige) |
SYS-6035B-8RB | SuperServer 6035B-8RB (Black) |
|
Motherboard |
Super X7DB8 |
|
Processor/Cache |
CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Quad-Core Intel XeonProcessor 5400/5300 sequence
- (Harpertown/Clovertown processor) up to 3.16 GHz
- Dual-Core Intel Xeon processor 5200/5100/5000 sequence (Wolfdale)
- (Woodcrest/Dempsey processor) up to 3.40 GHz
- NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon 5100 (Woodcrest) processors
|
System Bus | 1333 / 1066 / 667 MHz system bus |
Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
|
System Memory |
Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533 MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
|
Memory Type | 667 / 533 MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 512 MB, 1GB, 2GB, 4GB |
Memory Voltage | |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
|
On-Board Devices |
Chipset | - Intel 5000P (Blackford) chipset
- MCH + PXH + ESB2
|
SATA | - Intel ESB2 SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support
|
SCSI | - Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
- Host RAID 0, 1, & 10 support
|
RAID | - Support for Zero-Channel RAID
- Optional: (card not included)
- RAID 0, 1, 5, 10
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (Optional: AOC-SIMLC)
|
Network Controllers | - Intel (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT support for fast, scaleable, and reliable networking
|
Graphics | ATI ES1000 controller with 16 MB of video memory |
Super I/O | Winbond 83627HG chip |
|
Input / Output |
Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy | 1x Floppy controller; 1.44 MB, 2.88 MB |
LAN | 2x RJ45 LAN ports |
USB | - 2x USB rear ports
- 3x USB internal headers
- Total 5x USB 2.0 Compliant / 1.1 Compliant
|
VGA | 1x VGA Port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header
|
Parallel Port | 1x ECP / EEP parallel port |
|
System BIOS |
BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Hardware BIOS Virus protection
|
|
Chassis |
Form Factor | 3U Rackmount |
Model | SC833S2-R760 |
|
Dimensions |
Height | 5.2" (132 mm) |
Width | 17.7" (450 mm) |
Depth | 25.5" (647mm) |
Gross Weight | 73 lbs (33.1 kg) |
Available Colors | Beige, Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
- Alarm Mute Switch
|
LEDs | - Power LED
- Network activity LED
- System Overheat LED
|
Ports | (Optional front USB ports via 5.25" Drive bay) |
|
Expansion Slots |
PCI-Express | - 2 (x8) PCI-e slots
- 1x (x4) PCI-e (using x8) slot
|
PCI-X | - 2x 64-bit 133MHz PCI-X (3.3V) slots
- 1x 64-bit 100MHz PCI-X (3.3V) slot
|
|
Drive Bays |
Hot-Swap | 8x 3.5" SCA Ultra320/160 Hot-swap Drives |
Peripheral Bay(s) | - 3x 5.25" Peripheral Drive Bays
- 1x 5.25" Bay For Floppy Drive
|
|
Peripheral Drive(s) |
DVD-ROM | Panasonic 8x DVD, 24x CD, DVD-ROM Drive |
Floppy | TEAC 3.5" 1.44 MB Floppy Drive (Beige / Black) |
|
SCSI Backplane |
Dual Channel SCSI Backplane w/ Enclosure Management (SAF-TE) |
|
System Cooling |
Fans | - 4x 9cm 5.000 RPM Hot-Swap Fans
- 2x 8cm 5000 RPM Rear Exhaust Fans
|
Shroud | 1x Air Shroud |
|
Power Supply |
760W triple-redundant AC to DC power supply with PFC[ 24-pin, (8-pin, 4-pin)=12V ] |
AC Voltage | 100 - 240V, 50-60Hz, 14 - 8 A |
DC Output | 5V + 3.3V @ 200W |
+5 V | 36.0 A |
+5 V standby | 3.5 A |
+12 V | 50.0 A (combined) |
-12 V | 1.0 A |
+3.3 V | 36.0 A |
|
PC Health Monitoring |
CPU | - Monitors for CPU Cores, +3.3V, +5V, 12V, +1.2V
- 5-Phase-switching voltage regulator with auto-sense from 0.8375 V - 1.60 V
|
FAN | - Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
|
LED | CPU / System Overheat LED |
Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
|
Operating Environment / Compliance |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|