| |
Product SKUs |
| SYS-6028R-WTRT | SuperServer 6028R-WTRT (Black) |
| |
Motherboard |
| Super X10DRW-iT |
| |
Processor/Cache |
| CPU | - Intel® Xeon® processor E5-2600 v3 family
- (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | ** Please contact your Supermicro sales representative for additional details. |
| |
System Memory |
| Memory Capacity | - 16x 288-pin DDR4 DIMM sockets
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
|
| Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
|
| Memory Voltage | 1.2 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel® C612 Express chipset |
| SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| Network Controllers | - Intel X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
| Video | ASPEED AST2400 BMC |
| |
Input / Output |
| SAS/SATA | Customizable storage |
| LAN | - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 6x USB 3.0 ports (4 rear + 2 via header) |
| Video | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port / 1 Header |
| DOM | 2x SuperDOM (Disk on Module) ports |
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-825TQ-R740WB |
| |
Dimensions and Weight |
| Width | 17.2" (437mm) |
| Height | 3.5" (89mm) |
| Depth | 25.5" (648 mm) |
| Gross Weight | 52 lbs (23.6 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
- UID button
|
| LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| |
Expansion Slots |
| PCI-Express | - 4x PCI-E 3.0 x8 slots (2x Full-height Full-length, 2x Full-height Half-length)
- UIO AoC Compatibility Matrix
- (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| |
Drive Bays |
| Hot-Swap | 8x 3.5" Hot-swap SAS / SATA HDD trays (ready for PCI-E storage controller card) |
| |
Backplane |
| 1x 2U SAS backplane w/ Enclosure Management(SAS support requires optional SAS controller) |
| |
Peripheral Drives |
| DVD-ROM | Slim DVD-ROM drive (optional) |
| |
System Cooling |
| Fans | 3x 80 mm 7.000 RPM 4-pin PWM Fans |
| |
Power Supply with Power Distributor |
| 740 W (1+1) Redundant high-efficiency power supply with PMBus |
| AC Input | 100-240 V, 50-60 Hz, 9-3.5 A |
| DC Output | - 4 A @ +5 V Standby
- 61.7 A @ +12 V
|
| Certification | Platinum Certified |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- BIOS resuce hot keys
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
