| |
Product SKUs |
| SYS-6027R-TDT+ | SuperServer 6027R-TDT+ (Black) |
| |
Motherboard |
| Super X9DRD-iT+ |
| |
Processor/Cache |
| CPU | - Dual Socket R (LGA 2011)
- Intel Xeon processor E5-2600 and E5-2600 v2 family
- (up to 135 W TDP *)
- * Please contact your Supermicro sales representative for additional details
|
| Note | BIOS version 3.0 or above is required |
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory |
| Memory Capacity | - 24x 240-pin DDR3 DIMM sockets
- Up to 1.5 TB DDR3 ECC LRDIMM
- Up to 768 GB DDR3 ECC registered memory (RDIMM)
- Up to 128 GB DDR3 ECC/non-ECC unbuffered memory (UDIMM)
|
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
- LRDIMM: 64 GB, 32 GB
|
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602 chipset |
| SATA | - Via Cable for SATA controller
- SATA 2.0 (3 Gb/s) & 3.0 (6 Gb/s) with RAID 0, 1, 5, 10
|
| Network Controllers | - Intel X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics | Matrox G200eW |
| |
Input / Output |
| Serial ATA | - 2x SATA 3.0 ports (6 Gb/s)
- 6x SATA 2.0 ports (3 Gb/s)
|
| LAN | - 2x RJ45 10GBase-T LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 9x USB 2.0 ports total(4x rear + 4x via header + 1x Type A) |
| VGA | 1x VGA port |
| Serial Port / Header | - 1x Fast UART 16550 serial
- 1x COM port (rear)
|
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-825TQ-600WB |
| |
Dimensions |
| Width | 17.2" (437mm) |
| Height | 3.5" (89mm) |
| Depth | 25.5" (647mm) |
| Gross Weight | 36 lbs (16.4 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
- UID button
|
| LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- System information (overheat/UID) LED
|
| |
Expansion Slots |
| PCI-Express | - 1x PCI-E 3.0 x16 Full-height, Half-length
- 2x PCI-E 3.0 x8 Full-height, Half-length
- 1x PCI-E 3.0 x8 Low-profile
|
| |
Drive Bays |
| Hot-Swap | 8x 3.5" Hot-swap SATA HDD trays |
| |
Backplane |
| 1x 2 U SAS / SATA backplane |
| |
System Cooling |
| Fans | 3x 80x80x38mm Counter-rotating PWM fans |
| |
Power Supply with Digital Switching Control & PMBus 1.2 |
| 600W AC power supply w/ PFC (24-pin) |
| AC Voltage | 100-240 V, 50-60 Hz, 7.5 A max |
| +5 V | 18 A |
| +5 V standby | 3 A |
| +12 V | 49 A |
| -12 V | 0.5 A |
| +3.3 V | 15 A |
| Certification | Platinum Certified |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
