Beratung & Bestellung 04181 23577-10
Server Spezialist seit 20 Jahren
Direkt vom Value Added Distributor
PLEASE NOTE!

From 08. July 2019 we can be reached at the following telephone number:

+49 4181 2357780

Sie sind hier: Startseite > Shop > > Supermicro SuperServer 6026TT-GTRF

Sprache:    


Supermicro SuperServer 6026TT-GTRF

19" 2U GPU Twin with 2 nodes, Dual Xeon 5600, red

Supermicro SuperServer 6026TT-GTRF
Abbildung kann vom Original abweichen
Artikelnr.:
SYS-6026TT-GTRF

Herstellernr.:

SYS-6026TT-GTRF


Nicht mehr lieferbar

Supermicro
Offizieller Distributor & Systemintegrator Seit 1999 sind wir einer der ersten Distributoren und Systemintegratoren Deutschlands und können somit ein hervorragendes Preis- Leistungs-Verhältnis und umfangreiche Serviceangebote bieten.

Beschreibung

Hersteller: Supermicro

Supermicro SuperServer 6026TT-GTRF

  • Two hot-pluggable
  • Intel Xeon processor 5600/5500 series, with QPI up to 6.4 GT/s
  • Up to 192 GB** DDR3 1333/ 1066/ 800 MHz ECC registered DIMM / 48 GB unbuffered DIMM
  • 1 (x16) PCI-E 2.0 for Double-Width GPU
  • Integrated IPMI 2.0 with KVM and Dedicated LAN
  • Dual Intel 82574L Gigabit Ethernet controller
  • 6x Hot-swap SATA Drive Bays
  • 1400W Gold-level High-efficiency Redundant Power Supply
 

Product SKUs

SYS-6026TT-GTRFSuperServer 6026TT-GTRF (Black)
 

Motherboard

2x Super X8DTT-HF+
 

Processor/Cache

CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
  • Intel Xeon processor X5600/E5600/L5600 Series (Westmere) 40 W - 95 W
  • Intel Xeon processor X5500/E5500/L5500 Series (Nehalem-EP) 38 W - 95 W
QPIUp to 6.4 GT/s
 

System Memory

Memory Capacity
  • 12x 240-pin DIMM sockets
  • Supports up to 192 GB** 1333 / 1066 / 800 MHz DDR3 ECC registered memory
  • Supports up to 48 GB 1333 / 1066 / 800 MHz DDR3 ECC / Non ECC unbuffered memory
  • Memory Mirroring supported
Memory Type1333 / 1066 / 800MHz ECC registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB
  • , 8 GB**
  • , 16 GB**
Memory Voltage1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel x4 and x8 Single Device Data Correction (SDDC)
 

On-board Devices (per Node)

Chipset
  • Intel 5500 (Tylersburg) chipset
  • ICH10R
SATA
  • Intel ICH10R SATA 3.0 Gb/s controller
  • RAID 0, 1, 5, 10 support
Network Controllers
  • Dual Intel 82574L Gigabit Ethernet controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
GraphicsMatrox G200eW
Super I/OWinbond W83527HG chip
Clock Generator932S421 chip
 

Input / Output (per Node)

Serial ATA
  • Six Serial ATA ports
  • 6 SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x rear + 1x header (2x Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA1x VGA Port
Serial Port1x Fast UART 16550 serial port
 

System BIOS (per Node)

BIOS Type32Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
 

Chassis

Form Factor2U Rackmount
ModelCSE-827HD-R1400B
 

Dimensions

Height3.5" (89mm)
Width17.2" (437mm)
Depth28.5" (724 mm)
Gross Weight85 lbs (38.6kg)
Available ColorsBlack
 

Front Panel (per Node)

Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power LED (on power button)
  • Network activity LED
  • System Overheat/fan fail/power fail LED
  • UID LED (on UID button)
 

Expansion Slots (per Node)

PCI-Express1 (x16) PCI-E 2.0 for Double-Width GPU
 

Drive Bays (per Node)

Hot-Swap6x 3.5" SATA Hot-swap drive bays
 

Hard Drive Backplane

2U Hard drive Backplane
 

System Cooling

Fans4x Cooling Fans
 

Power Supply

1400 W high-efficiency (1+1) redundant power supply with PMBus
AC Input
  • 1100 W Output @ 100-140 V, 13.5-9.5 A, 50-60 Hz
  • 1400 W Output @ 180-240 V, 9.5-7.0 A, 50-60 Hz
DC Output
  • 1100 W: +12 V / 92 A; +5V sb / 4 A
  • 1400 W: +12 V / 116 A; +5 V sb / 4 A
With Distributor
  • +5 V: 30 A
  • +3.3V: 24 A
  • -12V: 0.6 A
CertificationGold Certified
 

PC Health Monitoring

CPU
  • Monitors for CPU cores,+1.5 V, +3.3 V, +5 V, +12 V, +5 Stdby, +3.3 Stdby, VBAT, Memory voltages.
  • CPU core 6-Phase-switching voltage regulator
FAN
  • Total of four 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors
  • PSU I²C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Power Fail / Overheat LED
  • Supsend-State Indicator LED
  • UID LED
Other FeaturesSDDC Support
 

Operating Environment / Compliance

RoHSRoHS Compliant
Environmental Specifications
  • Operating Temperature: 10° to 35 °C (50° to 95 °F)
  • Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
  • Operating relative humidity: 8% to 90% (non-condensing)
  • Non-operating relative humidity: 5 to 95% (non-condensing)