| |
Product SKUs |
| SYS-6015P-8 | SuperServer 6015P-8 (Beige) |
| SYS-6015P-8B | SuperServer 6015P-8B (Black) |
| |
Motherboard |
| Super X7DBP-8 |
| |
Processor/Cache |
| CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Quad-Core Intel XeonProcessor 5400/5300 sequence
- (Harpertown/Clovertown processor) up to 3.16 GHz
- Dual-Core Intel Xeon processor 5200/5100/5000 sequence (Wolfdale)
- (Woodcrest/Dempsey processor) up to 3.40 GHz
|
| System Bus | 1333 / 1066 / 667 MHz system bus |
| Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
| |
System Memory |
| Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 32 GB 667/533 MHz FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
|
| Memory Type | 667/533 MHz FB-DIMM (Fully Buffered DIMM) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 512 MB, 1GB, 2GB, 4GB |
| Memory Voltage | |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel 5000P (Blackford) chipset
- MCH + PXH + ESB2
|
| SCSI | - Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
- Host RAID 0, 1 support
|
| RAID | - Support for Zero-Channel RAID
- RAID 0, 1, 5, 10
- Optional: (card NOT included)
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIM1U)
- (Optional: AOC-SIM1U-3B and AOC-SIM1U-3D)
|
| Network Controllers | - Intel (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT support for fast, scaleable, and reliable networking
|
| Graphics | ATI ES1000 controller with 16 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Clock Generator | CK410B chip |
| |
Expansion Slots |
| Left universal slot | - 1x (x8) PCI-e slot OR
- 1x 64-bit 100MHz PCI-X (3.3V) slot
|
| Right Universal Slot | - 1x (x8) PCI-e slot OR
- 1x 64-bit 133MHz PCI-X (3.3V) slot
|
| IPMI | 1x SIM 1U Slot (IPMI 2.0)(Supermicro Intelligent Management) |
| |
Input / Output |
| IDE | - Single EIDE channels support up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy | 1x Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | - 2x USB rear ports
- 2x USB internal headers, 1 dual, 1 single
- USB 2.0 compliant / 1.1 compatible
|
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 2x Fast UART 16550 serial ports |
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | SC816S-700 |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 27" (686mm) |
| Gross Weight | 44 lbs (20.0kg) |
| Available Colors | Beige, Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- UID button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Failure LED
- UID LED
|
| Ports | N/A |
| |
Drive Bays |
| Hot-Swap | 4x 3.5" Hot-swap Ultra320 SCSI drive bays |
| |
Peripheral Drives |
| Floppy | 3.5" 1.44 MB Slim Floppy Drive |
| DVD-ROM | Slim 8x DVD-ROM drive |
| |
SCSI Backplane |
| 1x SCA814S 1U SCSI Backplane w/ SAF-TE |
| |
System Cooling |
| Fans | 4x 6-pin Counter-rotating Cooling Fans |
| |
Power Supply |
| 700 W AC-DC power supply and power distributor w/ PFC |
| AC Input | 100 - 240 V, 60-50 Hz, 10 - 4 A |
| +5 V standby | 4 A |
| +12 V | 57 A |
| With Power Distributor | - +5 V: 24 A
- +3.3 V: 21 A
- -12V: 0.6 A
|
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +3.3V, +5V, 12V, +5V Standby, VBAT
- CPU core 5-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V
|
| FAN | - Total of ten proprietary fan headers for up to ten fans
- Ten fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
|
| LED | CPU / System Overheat LED |
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Fan Speed Control
|
| |
Operating Environment / Compliance |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
