|
Product SKUs |
SYS-5035L-IB | SuperServer 5035L-IB (Black) |
|
Motherboard |
Super X7SLM-L |
|
Processor/Cache |
CPU | - Single LGA775 ZIF Socket
- Supports an Intel® Core?2 Duo E4000 Series
- Supports Intel Pentium E2000 Series
- Supports Intel Pentium D 945, 935, 925, 915
- and 820, 805
- Supports Intel Pentium 4 600 and 500 Series
- Supports Intel Celeron E1000 Series
- Supports an Intel Celeron 400 Series
- Supports Intel Celeron D 300 Series
|
System Bus | 1066 / 800 / 533 MHz system bus |
|
System Memory |
Memory Capacity | - Two 240-pin DIMM sockets
- Supports up to 2 GB of unbuffered, non-ECC DDR2 667/533/400 MHz memory (Single / Dual Channel)
|
Memory Type | DDR2 667/533/400MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1 GB |
Memory Voltage | 1.8 V only |
|
On-Board Devices |
Chipset | - Intel 945GC + ICH7R
- Realtek RTL8111C-GR
|
SATA | - Intel ICH7R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support
|
Network Controllers | - 2x Realtek RTL8111C-GR Gigabit Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
|
Graphics | On-board GMA950 video |
Super I/O | Winbond 83627DHG chip |
Clock Generator | CK505 |
|
Expansion Slots |
PCI-Express | - 1x (x16) PCI-Express Slot
- 1x (x4) PCI-Express (in x8 slot)
|
PCI | 2x 32-bit 33MHz PCI (5V) slots |
|
Input / Output |
Serial ATA | - Four SATA ports ( 3 Gb/s )
- Four SATA hard drives supported
|
IDE | - One EIDE channel supports up to two UDMA/IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
LAN | 2x RJ45 LAN ports |
USB | - 8x USB 2.0 / 1.1 compatible
- 2 rear + 2 Type A connector + 2 headers (4 ports)
|
VGA | Intel GMA950 |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | - 1x Fast UART 16550 serial port
- 1x Serial Header
|
|
System BIOS |
BIOS Type | 8Mb Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
|
Chassis |
Form Factor | Mid-Tower |
Model | CSE-731i-300B |
|
Physical Features |
Height | 14.25" (362 mm) |
Width | 7.25" (184 mm) |
Depth | 16.75" (425 mm) |
Weight | 17.4 lbs (7.9 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
Ports | 2x Front side USB ports (USB 2.0 ready) |
|
Drive Bays |
Internal | 4x 3.5" tool-less HDD trays |
External | - 2x 5.25" external drive bays
- 1x 3.5" external drive bay (OEM option)
|
|
System Cooling |
Fans | - 1x 9 cm (rear) PWM fan w/ tool-less design
- 1x 8 cm (front) cooling fan (optional)
|
|
Power Supply |
300 W AC power supply w/ PFC |
AC Voltage | 100 - 240 V, 50-60 Hz, 5 A |
DC Output | 5 V + 12 V + 3.3 V - 12 V < 290 W |
+5 V | 19 A |
+5 V standby | 2.0 A |
+12 V | 11 A + 11.5 A |
-12 V | 0.15 A |
+3.3 V | 16.0 A |
Certification | Bronze Certified |
|
PC Health Monitoring |
CPU | - Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V/+5V Standby, VBAT, Memory, Chipset
- CPU core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
FAN | - Total of five 4-pin fan headers
- 5x fans with tachometer monitoring
- Status monitor for speed control
- Status Monitor for on / off control
- Support 3-pin PWM fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 5 x Fan Connectors
- I²C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
- PECI
|
LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- +5 V standby alert LED
|
Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
- SDDC Support
|