|
Product SKUs |
SYS-5026T-TB | SuperServer 5026T-TB (Black) |
|
Motherboard |
Super X8STE |
|
Processor/Cache |
CPU | - LGA 1366 Socket
- Intel Core i7-980X, i7-975 and i7-965 Extreme Edition
- Intel Core i7 series
- Intel Xeon 5600/5500 series
- Intel Xeon 3600/3500 series
|
System Bus | QPI (up to 6.4 GT/s) |
|
System Memory |
Memory Capacity | - Supports up to 24 GB 1333 / 1066 / 800 MHz DDR3 ECC / non-ECC unbuffered memory
- Three Channel memory bus
- 6 DIMM sockets
|
Memory Type | 1333 / 1066 / 800MHz unbuffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB |
Memory Voltage | 1.5 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
|
On-Board Devices |
Chipset | - Intel X58 Express chipset
- ICH10R
|
SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support
|
VGA | Integrated Graphics |
Super I/O | Winbond 83627DHG chip |
Clock Generator | CK505 |
|
Expansion Slots (Low-Profile) |
PCI-Express | - 3 (x8) PCI-e 2.0 slots (1 using x16 slot)
- 1x (x4) PCI-e slot (using x8 slot)
|
PCI | 2x 32-bit PCI slot |
|
Input / Output |
Floppy | 1x Floppy controller; 1.44 MB |
LAN | 2x RJ45 LAN ports |
USB | - 8x USB rear ports
- 2x USB on-board
- 1x USB internal header (2 ports)
- Total 12x USB 2.0 Compliant
|
VGA | 1x VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
|
|
System BIOS |
BIOS Type | 4 Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
Chassis |
Form Factor | 2U Rackmount |
Model | SC822TQ-400LPB |
|
Dimensions |
Height | 3.5" (89mm) |
Width | 16.8" (426 mm) |
Depth | 25.6" (650mm) |
Gross Weight | 50 lbs (22.7 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
optional Front Bezel | Please refer to the Front Bezel Compatibility Table |
|
Drive Bays |
Hot-Swap | 6x 3.5" SATA Hot-swap drive trays |
Peripheral Bay(s) | 1x 5.25" full-height peripheral bay |
|
Peripheral Drives |
CD-ROM | TEAC Slim 24x CD-ROM Drive (Optional) |
Floppy | 3.5" 1.44 MB Floppy Drive (Optional) |
|
SATA Backplane |
1x 2U SATA backplane |
|
System Cooling |
Fans | 4x 80 mm 6300 RPM fans |
|
Power Supply |
400 W AC high-efficiency power supply w/ PFC |
AC Voltage | 100 - 240 V, 60-50 Hz, 6-2.7 A |
+5 V | 30 A |
+5 V standby | 4 A |
+12 V | 32 A |
-12 V | 0.5 A |
+3.3 V | 25 A |
Certification | Certified |
|
PC Health Monitoring |
CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, 12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375 V-1.60 V
|
FAN | - Total of six fan headers supporting up to 6 fans
- Six 4-pin fan headers
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - CPU / System Overheat LED
- +5 V Standby alert LED
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 5/6 |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|