|
Product SKUs |
SYS-5018D-MTRF | SuperServer 5018D-MTRF (Black) |
|
Motherboard |
Super X10SLM-F |
|
Processor/Cache |
CPU | - Intel Xeon processor E3-1200 v3 family, 4th Gen Core i3, Pentium, Celeron processors
- Socket H3 (LGA 1150)
|
|
System Memory |
Memory Capacity | - 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC unbuffered memory (UDIMM)
|
Memory Type | 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 8 GB, 4 GB, 2 GB, 1 GB |
Memory Voltage | 1.5 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
Chipset | Intel C224 Express PCH |
SATA | - SATA-3 (6 Gb/s) w/ RAID 0, 1, 10, 5
- SATA2 (3Gbps) w/ RAID 0, 1
|
Network Controllers | - Intel® i217LM + Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
VGA | ASPEED AST2400 BMC |
|
Input / Output |
Serial ATA | - 4x SATA-3 (6 Gb/s) ports
- 2x SATA2 (3Gbps) ports
- SATA DOM Power Connector
|
LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | - 4x USB 3.0 ports (1x Type-A, 2+1x via header)
- 6x USB 2.0 ports (4 rear, 2 via header)
|
VGA | 1x VGA port |
Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
|
|
PC Health Monitoring |
Voltage | - Monitors for CPU cores, +12 V, +3.3 V, +5 V, +5 V Standby, VBAT, HT, Memory, chipset voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375 V - 1.60 V
|
FAN | - Total of five 4-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - CPU / System Overheat LED
- +5 V Standby alert LED
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|
Chassis |
Form Factor | 1U Rackmount |
Model | CSE-813MTQ-R400CB |
|
Dimensions and Weight |
Height | 1.7" (43 mm) |
Width | 17.2" (437mm) |
Depth | 19.8" (503 mm) |
Weight | - Gross Weight: 31.4 lbs (14.3 kg)
- Net Weight: 18.6 lbs (8.5 kg)
|
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
Ports | - 2x USB ports
- 1x Serial COM Port
|
|
Expansion Slots |
PCI-Express | 1x PCI-E 3.0 x8 (in x16) Full-height slot |
|
Drive Bays |
Hot-Swap | 4x 3.5" Hot-swap SATA-3 HDDs w/ RAID |
Peripheral Bay | Slim optical drive (optional) |
|
Backplane |
SAS-2/SATA-3 HDD Backplane(SAS- support requires optional SAS controller) |
|
System Cooling |
Fans | - 4x 4 cm 12,500 RPM PWM fans
- Optional fans to cool add-on cards
|
Shroud | 1x Air Shroud |
|
Power Supply |
400 W (1+1) Redundant SuperCompact Short-depth AC-DC Gold Level power supply with PMBus and I²C |
AC Input | 400 W: 100-240 V, 50-60 Hz, 6-3 A |
DC Output +5 V standby | 3 A |
DC Output +12 V | 33 A |
With Power Distributor | - +5 V: 25 A
- +3.3 V: 25 A
- -12V: 0.6 A
|
|
System BIOS |
BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
Management |
Software | - IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
|
Operating Environment / Compliance |
RoHS | RoHS2 (2011/65/EU) Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|