| |
Product SKUs |
| SYS-5018D-MTLN4F | SuperServer 5018D-MTLN4F (Black) |
| |
Motherboard |
| Super X10SLM+-LN4F |
| |
Processor/Cache |
| CPU | - Intel Xeon processor E3-1200 v3 family, 4th Gen Core i3, Pentium, Celeron processors
- Socket H3 (LGA 1150)
|
| |
System Memory |
| Memory Capacity | - 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC unbuffered memory (UDIMM)
|
| Memory Type | 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C224 PCH chipset |
| SATA | - SATA-3 (6 Gb/s) w/ RAID 0, 1, 5, 10
- SATA2 (3Gbps) w/ RAID 0, 1
- SATA DOM Power Connector
|
| Network Controllers | - Intel i210AT controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA | ASPEED AST2400 BMC |
| |
Input / Output |
| Serial ATA | - 4x SATA-3 (6 Gb/s) ports
- 2x SATA2 (3Gbps) ports
- SATA DOM Power Connector
|
| LAN | - 4x RJ45 GbE LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 4x USB 3.0 ports (2x rear, 1x Type-A, 1x via header)
- 6x USB 2.0 ports (2 rear, 4 via header)
|
| VGA | 1x VGA port |
| Serial Port / Header | 2x COM ports (1x rear, 1x header) |
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU cores, 12 V, +3.3 V, +5 V, +3.3 V Standby, +5 V Standby, VBAT, HT, Memory, chipset voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375 V - 1.60 V
|
| FAN | - Total of five 4-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- +5 V Standby alert LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-813MTQ-350CB |
| |
Dimensions and Weight |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 19.8" (503 mm) |
| Weight | - Gross Weight: 30.4 lbs (13.8 kg)
- Net Weight: 17.6 lbs (8 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 4x Network activity LEDs
- System Overheat LED
|
| Ports | - 2x USB ports
- 1x Serial COM Port
|
| |
Expansion Slots |
| PCI-Express | 1x PCI-E 3.0 x16 Full-height slot |
| |
Drive Bays |
| Hot-Swap | 4x 3.5" Hot-swap SATA-3 HDDs w/ RAID |
| Peripheral Bay | Slim optical drive (optional) |
| |
Backplane |
| SAS-2/SATA-3 HDD Backplane(SAS- support requires optional SAS controller) |
| |
System Cooling |
| Fans | - 4x 4 cm 12,500 RPM PWM fans
- Optional fans to cool add-on cards
|
| |
Power Supply |
| 350 W AC power supply w/ PFC |
| AC Voltage | 100-240 V, 50-60 Hz, 4.2-1.8 A |
| +5 V | 18 A |
| +5 V standby | 3 A |
| +12 V | 29 A |
| +3.3 V | 15 A |
| Certification | Gold Certified |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
Operating Environment / Compliance |
| RoHS | RoHS2 (2011/65/EU) Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
