| |
Product SKUs |
| SYS-5018A-TN4 | SuperServer 5018A-TN4 (Black) |
| |
Motherboard |
| Super A1SAi-2750F |
| |
Processor/Cache |
| CPU | - Intel Atom processor C2750
- CPU TDP 20W (8-Core)
- FCBGA 1283
- System-on-Chip
|
| |
System Memory |
| Memory Capacity | - 4x 204-pin DDR3 SO-DIMM sockets
- Supports up to 64 GB DDR3 ECC memory
|
| Memory Type | 1600/1333MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 8 GB, 4 GB, 2 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel System-on-Chip Design |
| SATA | C2000 SoC SATA3 (6Gbps), SATA2 (3Gbps) |
| Network Controllers | - C2000 Soc I354 Quad GbE controllers (MACs)
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Graphics | BMC integrated ASPEED AST2400 |
| USB 3.0 | Renesas uPD720201 |
| |
Input / Output |
| Serial ATA | - 2x SATA-3 (6 Gb/s) ports
- 4x SATA2 (3Gbps) ports
|
| LAN | - 4x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 4x USB 3.0 ports (2x rear, 1x Type A, 1x via header)
- 2x USB 2.0 ports (2 rear)
|
| Serial Port | 2x Fast UART 16550 Serial Port (1 rear, 1 via header) |
| DOM | 1x SATA DOM (Disk on Module) power connector |
| VGA | 1x VGA Port |
| Others | - TPM 1.2 header
- 4-pin 12V DC power input or 24-pin ATX power input
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-504-203B |
| |
Dimensions and Weight |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 9.8" (249 mm) |
| Weight | - Net Weight: 8 lbs (3.62 kg)
- Gross Weight: 12 lbs (5.44 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Information LED (temp, status)
|
| |
Expansion Slots |
| PCI-E | 1x PCI-E 2.0 x8 slot via riser** |
| |
Drive Bays |
| HDD | - 2x 3.5" or 4x 2.5" internal SATA2 hard
- drive bays (optional) *
|
| |
Power Supply |
| 200 W Low Noise AC-DC power supply with PFC |
| AC Voltage | 100 - 240 V, 50-60 Hz, 2.6 A Max |
| +5 V | 8.0 A (max.) |
| +5 V standby | 2.0 A (max.) |
| +12 V | 16 A (max.) |
| -12 V | 0.5 A (max.) |
| +3.3 V | 8.0 A (max.) |
| Certification | Gold Certified |
| |
System BIOS |
| BIOS Type | 64 Mb SPI Flash EEPROM with AMI UEFI BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- ACPI 5.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
