| |
Product SKUs - Discontinued SKU. Please contact sales-rep for possible OEM production quantities. MOQ may apply |
| SYS-5017GR-TF-FM209 | SuperServer 5017GR-TF-FM209 (Black) |
| |
Motherboard |
| Super X9SRG-F |
| |
Processor/Cache |
| CPU | - Single Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600 and E5-2600 v2 family?
- (up to 12 cores and up to 130 W)
|
| Note | ? BIOS version 3.0 or above is required |
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory |
| Memory Capacity | - 8x 240-pin DDR3 DIMM sockets
- Up to 512 GB DDR3 ECC LRDIMM
- Up to 256 GB DDR3 ECC registered memory (RDIMM)
|
| Memory Type | 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors
- (using ECC memory)
|
| |
On-Board Devices |
| GPU | 2x NVIDIA Tesla M2090 Fermi GPU cards |
| Chipset | Intel C602 chipset |
| SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers | - Intel i350 Dual port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Graphics | Matrox G200eW 16MB DDR2 graphics |
| Super I/O | Nuvoton W83527 |
| |
Input / Output |
| SATA | - 2x SATA 3.0 ports (6 Gb/s)
- 4 SATA 2.0 ports (3 Gb/s)
|
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 6 USB 2.0 ports total (2x rear + 4x via headers) |
| Video | 1x VGA Connector |
| Keyboard/Mouse | 1x PS/2 Keyboard/Mouse port |
| Serial Port | 1x Serial header |
| DOM | 1x DOM (Disk on Module) power connector |
| |
System BIOS |
| BIOS Type | 64 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
- UEFI
- RTC (Real Time Clock) Wakeup
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-818G-1K43B |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 28.2" (716 mm) |
| Gross Weight | 44.4 lbs (20.1 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED / UID LED
|
| |
Expansion Slots |
| PCI-Express | - 2x (x16) PCI-E 3.0 slots (2x NVIDIA Tesla M2090 Fermi GPU cards integrated)
- 1x (x8) PCI-E 3.0 slot for I.B. card
|
| |
Drive Bays |
| Hot-Swap | 3x 3.5" Hot-swap drive bays |
| |
System Cooling |
| Fans | 8x counter-rotating fans with optimal fan speed control |
| |
Power Supply |
| 1400 W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 |
| AC Voltage | - 1200 W: 100-140 V, 14.7-10.5 A, 50-60 Hz
- 1400 W: 180-240 V, 10.5-8.0 A, 50-60 Hz
|
| +5 V standby | 6 A |
| +12 V | - 100 A / 115 V ac
- 117 A / 230 V ac
|
| With Power Distributor | +5 V: 14 A |
| Certification | Platinum Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU cores,+1.5 V, +3.3 V, +5 V, +12 V, +5 Stdby, +3.3 Stdby, VBAT, Memory voltages.
- CPU core 5-Phase-switching voltage regulator
|
| FAN | - Total of eight 4-pin PWM fans
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - Power Fail / Overheat LED
- Supsend-State Indicator LED
- UID LED
|
| Other Features | SDDC Support |
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
