|
Product SKUs |
SYS-5016T-MTFB | SuperServer 5016T-MTFB (Black) |
|
Motherboard |
Super X8STi-F |
|
Processor/Cache |
CPU | - LGA 1366 Socket
- Intel Xeonprocessor 5600 Series (Westmere)
- Intel Xeonprocessor 5500 Series (Nehalem-EP)
- NOTE: Intel Xeon 3500 Series and Core i7 are Not Supported (Max TDP > 100 Watts)
|
System Bus | QPI (up to 6.4 GT/s) |
|
System Memory |
Memory Capacity | - Supports up to 24 GB 1333 / 1066 / 800 MHz DDR3 ECC / non-ECC unbuffered memory
- Three Channel memory bus
- 6 DIMM sockets
|
Memory Type | 1333 / 1066 / 800MHz unbuffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB |
Memory Voltage | 1.5 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
|
On-Board Devices |
Chipset | - Intel X58 Express chipset
- ICH10R
|
SATA | - Intel ICH10R SATA (3.0 Gb/s) controller
- RAID 0, 1, 5, 10 support
|
Network Controllers | - 2x Intel Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
VGA | Integrated Graphics |
Super I/O | Winbond 83627DHG chip |
Clock Generator | CK505 |
|
Expansion Slots |
PCI-Express | - 1x (x16) PCI-E 2.0 slot via riser card
- AOC Compatibility Matrix
|
|
Input / Output |
Serial ATA | - Six SATA ports
- Six SATA hard drives supported
|
Floppy | 1x Floppy controller; 1.44 MB |
LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | - 2x USB rear ports
- 2x USB on-board
- 2x USB internal header(4 ports)
- Total 8x USB 2.0 Compliant
|
VGA | 1x VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
|
|
System BIOS |
BIOS Type | 4 Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
Chassis |
Form Factor | 1U Rackmount |
Model | SC813MTQ-280CB(Chassis not sold separately) |
|
Dimensions |
Height | 1.7" (43 mm) |
Width | 17.2" (437mm) |
Depth | 19.8" (503 mm) |
Gross Weight | 38 lbs (17.2 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Failure LED
|
Ports | - 2x Front USB Ports
- 1x Serial COM Port
|
|
Drive Bays |
Hot-Swap | 4x 3.5" SATA Hot-swap drive bays |
|
System Cooling |
Fans | 4x Cooling Fans |
|
Power Supply |
280 W AC power supply w/ PFC |
AC Voltage | 100 - 240 V, 50 - 60 Hz, 5 A |
+5 V | 18 A |
+5 V standby | 2 A |
+12 V | 23 A @ 100-140 V, 27 A @ 180-240 V |
-12 V | 1.0 A |
+3.3 V | 15 A |
|
PC Health Monitoring |
CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, 12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375 V-1.60 V
|
FAN | - Total of six fan headers supporting up to 6 fans
- Six 4-pin fan headers
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - CPU / System Overheat LED
- +5 V Standby alert LED
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 6/6, Pb Free |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|