| |
Product SKUs |
| SYS-4048B-TR4FT | SuperServer 4048B-TR4FT (Black) |
| |
Motherboard |
| Super X10QBi |
| |
Processor/Cache |
| CPU | - Intel® Xeon® processor E7-8800 v4/v3, E7-4800 v4/v3
- family
- (up to 24 Cores and 165W TDP)
- Quad Socket R1 (LGA 2011)
|
| Cache | Up to 60 MB |
| System Bus | QPI up to 9.6 GT/s |
| |
System Memory |
| Memory Capacity | - 96x 288-pin DDR4 DIMM slots
- Supports up to 12TB DDR4 ECC 3SDS LRDIMM in 96 DIMM slots
|
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR4 SDRAM 72-bit, 288-pin gold-plated DIMMs |
| DIMM Sizes | 128GB, 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | 1.2 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602J chipset |
| AHCI SATA | - SATA-3 (6 Gb/s) with RAID 0, 1
- SATA2 (3Gbps) with RAID 0, 1, 5, 10
|
| Network Controllers(via AOM) | - Intel X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T
- , 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| IPMI(via AOM) | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED 2400
|
| Graphics | ASPEED 2400 |
| |
Input / Output |
| AHCI SATA | - 2x SATA-3 (6 Gb/s) ports
- 4x SATA2 (3Gbps) ports
|
| LAN | - 2x RJ45 10GBase-T ports on AOM
- 1x dedicated LAN port for IPMI on AOM
|
| USB | 2x USB 2.0 ports |
| Serial Port / Header | 2x Fast UART 16550 ports: 1 rear and 1 header |
| DOM | 1x DOM (Disk on Module) power connector |
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
Chassis |
| Form Factor | - 4U Rackmountable
- Rackmount Kit: Comes with the system
|
| Model | CSE-418XA-R3240B |
| |
Dimensions and Weight |
| Height | 7.0" (178 mm) |
| Width | 17.2" (437mm) |
| Depth | 31.3" (795mm) |
| Weight | - Net Weight: 74.5 lbs (33.79 kg)
- Gross Weight: 115 lbs (52.16 kg)
|
| Available Colors | Black |
| |
Drive Bays |
| Hot-Swap | - 24x 2.5" Hard drive bays (default)*
- 48x 2.5" Hard drive bays (optional)
- * BPN-SAS3-216A direct attached backplane, system supports up to 24 HDDs by using selected RAID/HBA card and default HDD connection is onboard C602J chipset 2 SATA3 + 4 SATA2
|
| |
Expansion Slots |
| PCI-Express | - 11x PCI-E 3.0 slots w/ 48 memory slots
- (4x PCI-E 3.0 x16 and 7x PCI-E 3.0 x8)
- 8x PCI-E 3.0 slots w/ 96 memory slots
- (4x PCI-E 3.0 x16 and 4x PCI-E 3.0 x8)
|
| |
Backplane |
| SAS/SATA HDD Backplane |
| |
System Cooling |
| Fans | - 4x 92mm RPM Hot-Swap Cooling Fans
- 3x 80mm RPM Hot-Swap Rear Exhaust Fan
- 2x 80mm Rear Exhaust Fans (optional)
|
| Shrouds | 1x Air Shroud (MCP-310-41804-0B) |
| |
Power Supply |
| 1620 W high-efficiency redundant power supply w/ PMBus |
| AC Input | - 1000 W Output @ 100-120 V, 12-10 A, 50-60 Hz
- 1200 W Output @ 120-140 V, 12-10 A, 50-60 Hz
- 1620 W Output @ 180-240 V, 10.5-8 A, 50-60 Hz
|
| DC Output | - 1000 W: +12 V / 84 A; +5 V sb / 4 A
- 1200 W: +12 V / 100 A; +5V sb / 4 A
- 1620 W: +12 V / 150 A; +5 V sb / 4 A
|
| Certification | Platinum Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU cores, +1.2 V, 1.5 V, +3.3 V, +12 V, (+3 V, 1.0 V, 1.2 V, 1.8 V, 1.1 V) Standby, VBAT, Memory, chipset voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6 V-1.35 V
|
| FAN | - 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
|
| Temperature | - Monitoring for CPU and system environment
- Thermal Control for 9x fan connectors
|
| Other Features | Chassis intrusion detection |
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
