| |
Product SKUs |
| SYS-4028GR-TRT2 | SuperServer 4028GR-TRT2 (Black) |
| |
Motherboard |
| Super X10DRG-OT+-CPU |
| |
Processor/Cache |
| CPU | - Intel® Xeon® processor E5-2600 v4/
- v3 family
- (up to 160W TDP)
- *
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 22 Cores / Up to 55MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| |
System Memory |
| Memory Capacity | - 24x 288-pin DDR4 DIMM slots
- Up to 3TB ECC 3DS LRDIMM, 1.5TB ECC RDIMM
|
| Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM:
- 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| |
On-Board Devices |
| Chipset | Intel® C612 chipset |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Dual 10GBase-T Ports with Intel® X540
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Graphics | ASPEED AST2400 BMC |
| |
Input / Output |
| SATA | 4 SATA3 (6Gbps) ports |
| LAN | - 2 RJ45 10GBase-T LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 4 USB 3.0 ports |
| Video | 1x VGA Connector |
| Serial Port | 1x Serial header |
| |
System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI
|
| |
Chassis |
| Form Factor | - 4U Rackmountable
- Rackmount Kit (MCP-290-00057-0N)
|
| Model | CSE-418GTS-R4000B |
| |
Dimensions |
| Height | 7.0" (178 mm) |
| Width | 17.2" (437mm) |
| Depth | 29" (737 mm) |
| Weight | - Net Weight: 80 lbs (36.2 kg)
- Gross Weight: 135 lbs (61.2 kg)
|
| Available Colors | Black |
| |
Drive Bays |
| Hot-Swap | 24x 2.5" Hard drive bays |
| |
Expansion Slots |
| PCI-Express | - 11 PCI-E 3.0 x16 (FH, FL) slots
- 1 PCI-E 3.0 x8 (in x16) slots
- Single Root Complex
|
| |
Backplane |
| SAS/SATA HDD Backplane |
| |
System Cooling |
| Fans | 8x 92mm RPM Hot-Swap Cooling Fans |
| Shrouds | 1 Air Shroud (MCP-310-84808-0B) |
| |
Power Supply |
| 2000W Redundant Power Supplies with PMBus |
| Total Output Power | 1000W/1800W/1980W/2000W |
| Dimension(W x H x L) | 73.5 x 40 x 265 mm |
| Input | - 100-120Vac / 12-9.5A / 50-60Hz
- 200-220Vac / 10-9.5A / 50-60Hz
- 220-230Vac / 10-9.8A / 50-60Hz
- 230-240Vac / 10-9.8A / 50-60Hz
- 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
|
| +12 V | - Max: 83.3A / Min: 0A (100-120Vac)
- Max: 150A / Min: 0A (200-220Vac)
- Max: 165A / Min: 0A (220-230Vac)
- Max: 166.7A / Min: 0A (230-240Vac)
- Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
|
| 12Vsb | Max: 2.1A / Min: 0A |
| Output Type | 25 Pairs Gold Finger Connector |
| Certification | UL/cUL/CB/BSMI/CE/CCC Titanium Level |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU cores, +1.2 V, 1.5 V, +3.3 V, +12 V, (+3 V, 1.0 V, 1.2 V, 1.8 V, 1.1 V) Standby, VBAT, Memory, chipset voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6 V-1.35 V
|
| FAN | - 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
|
| Temperature | - Monitoring for CPU and system environment
- Thermal Control for 8x fan connectors
|
| Other Features | Chassis intrusion detection |
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
