| |
Product SKUs |
| SYS-2028U-TR4+ | SuperServer 2028U-TR4+ (Black) |
| |
Motherboard |
| Super X10DRU-i+ |
| |
Processor/Cache |
| CPU | - Intel® Xeon® processor E5-2600 v3 family
- (up to 160W TDP **)
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | ** Please contact your Supermicro sales representative for additional details. |
| |
System Memory |
| Memory Capacity | - 24x 288-pin DDR4 DIMM sockets
- Up to 1.5TB ECC LRDIMM, 768GB ECC RDIMM
|
| Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
|
| Memory Voltage | 1.2 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel® C612 Express chipset |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Connectivity | 4x Gigabit Ethernet ports via AOC-2UR68-i4G |
| Graphics | ASPEED AST2400 BMC |
| |
Input / Output |
| SATA | 10x SATA3 (6Gbps) ports |
| SAS | 24x SAS3 ports support via optional Add-on Cards |
| LAN | - 4x Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 5x USB 3.0 ports(2 rear, 2 onboard header, 1 Type A) |
| Video | 1x VGA Connector |
| Serial Port / Header | 1x Serial header |
| DOM | 2x SuperDOM (Disk on Module) ports |
| |
Management |
| Software | - SuperDoctor® 5
- Watch Dog
- NMI, SPM, SUM
- IPMI 2.0
- Intel Node Manager
|
| Power Configurations | - ACPI / APM Power Management
- Power-on mode for AC power recovery
|
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-219UAC-R1K02 |
| |
Dimensions and Weight |
| Width | 17.2" (437mm) |
| Height | 3.5" (89mm) |
| Depth | 25.5" (647mm) |
| Gross Weight | 36 lbs (16.4 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- System information (overheat/UID) LED
|
| |
Expansion Slots |
| PCI-Express | - 1x PCI-E 3.0 x16 slot (FH, 10.5" L)
- 7x PCI-E 3.0 x8 slots (5x FH, 10.5" L, 1x LP, 1x Internal LP)
- (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| |
Drive Bays |
| Hot-Swap | - 24x Hot-swap 2.5" Drive Bays:
- 10x SATA3 ports by default
- Optional drive support: 24x SAS3
- Note: optional storage card is required to support more than 10 drives.
|
| |
Backplane |
| 2U SAS/SATA backplane |
| |
System Cooling |
| Fans | 4x 8 cm heavy duty PWM fans |
| |
Power Supply with Digital Switching Control |
| 1000W Titanium Level (96%) High-efficiency Redundant Single Output Power Supplies |
| AC Input | - 100-127 V, 50-60 Hz
- 200-240 V, 50-60 Hz
|
| +12 V | - Max: 62.5A & Min: 0A (100Vac-127Vac)
- Max: 83A (200Vac-240Vac)
|
| 12V SB | Max: 2.1A |
| Certification | Titanium Level |
| |
System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 5°C to 40°C (41°F to 104°F)
- Non-operating temperature: -40 °C to 60 °C (-40 °F to 140 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
